FAG 7316-B-XL-MP
Angular contact ball bearing 73..-B-XL-MP, single row, X-life, solid brass cage
Main Dimensions & Performance Data
Mounting dimensions
FAG 7316-B-XL-MP Angular Contact Ball Bearing Introduction
The 7316-B-XL-MP is an FAG angular contact ball bearing in the 73..-B-XL-MP series. Product data identifies it as a single-row, X-life bearing with a solid brass cage.
What category does the 7316-B-XL-MP belong to?
It is categorized under FAG ball bearings as an Angular Contact Ball Bearing. The supplied data lists the product series as Angular Contact Ball Bearings.
7316-B-XL-MP Dimensions and Performance Specifications
- Bore diameter: 80 mm
- Outside diameter: 170 mm
- Width: 39 mm
- Basic dynamic load rating, radial: 155,000 N
- Basic static load rating, radial: 124,000 N
- Fatigue load limit, radial: 7,700 N
- Limiting speed: 6,800 1/min
- Reference speed: 4,250 1/min
- Weight: 4.09 kg
What contact geometry is specified for this bearing?
The supplied data lists a contact angle of 40°. Additional geometry values include a 71.9 mm distance between the apexes of the pressure cones, 136.7 mm outer-ring shoulder diameter, and 115.7 mm inner-ring shoulder diameter on the wide side face.
Mounting, Chamfer, and Temperature Data for the FAG 7316-B-XL-MP
Mounting dimensions include a minimum shaft shoulder diameter of 92 mm, maximum housing shoulder diameter of 158 mm, and an additional maximum housing shoulder diameter of 163 mm. The maximum fillet radius is 2.1 mm for the shaft and 1 mm for the housing.
What limits should be reviewed before installation?
Before installation, review the supplied mounting dimensions, minimum chamfer dimensions of 2.1 mm and 1.1 mm, and the stated operating temperature range from -30 °C to 150 °C. Compatibility should be checked against the actual shaft, housing, and assembly requirements.
