FAG 7317-B-XL-JP-UO
Angular contact ball bearing 73..-B-XL-JP, single row, X-life, steel sheet metal cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
85 mm
Bore diameter
D
180 mm
Outside diameter
B
41 mm
Width
Cr
167,000 N
Basic dynamic load rating, radial
C0r
138,000 N
Basic static load rating, radial
Cur
8,300 N
Fatigue load limit, radial
nG
4,900 1/min
Limiting speed
nϑr
4,100 1/min
Reference speed
≈m
4.4 kg
Weight
Mounting dimensions
da min
99 mm
Minimum diameter of shaft shoulder
Da max
166 mm
Maximum diameter of housing shoulder
Db max
173 mm
Maximum diameter of housing shoulder
ra max
2.5 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7317-B-XL-JP-UO Angular Contact Ball Bearing Overview
What is the 7317-B-XL-JP-UO?
The 7317-B-XL-JP-UO is an FAG single-row angular contact ball bearing in the 73..-B-XL-JP series. The supplied product data identifies it as an X-life bearing with a steel sheet metal cage.
- Brand: FAG
- Series: Angular Contact Ball Bearings
- Category: Brand > FAG > Ball Bearings > Angular Contact Ball Bearings
- Bore diameter: 85 mm
- Outside diameter: 180 mm
- Width: 41 mm
Main Dimensions and Rated Performance Data
What performance values are provided for this bearing?
The supplied data lists the bearing dimensions, load ratings, speed values, weight, and contact angle. These values are presented as product data rather than application-specific guarantees.
- Basic dynamic load rating, radial (Cr): 167,000 N
- Basic static load rating, radial (C0r): 138,000 N
- Fatigue load limit, radial (Cur): 8,300 N
- Limiting speed (nG): 4,900 1/min
- Reference speed (nϑr): 4,100 1/min
- Weight: approximately 4.4 kg
- Contact angle (α): 40°
Mounting, Geometry, and Temperature Details
What dimensional and operating details should be reviewed?
The supplied mounting and geometry data can be checked against the mating shaft and housing layout. The stated operating temperature range runs from -30 °C to 150 °C.
- Minimum shaft shoulder diameter (da min): 99 mm
- Maximum housing shoulder diameter (Da max): 166 mm
- Maximum housing shoulder diameter (Db max): 173 mm
- Maximum shaft fillet radius (ra max): 2.5 mm
- Maximum housing fillet radius (ra1 max): 1 mm
- Minimum chamfer dimensions: rmin 3 mm; r1 min 1.1 mm
- Outer-ring shoulder diameter (D1): 144.15 mm
- Inner-ring shoulder diameter (d1): 122 mm
- Distance between pressure-cone apexes (a): 76.1 mm
