FAG 7220-B-XL-TVP-UA
Angular contact ball bearing 72..-B-XL-TVP, single row, X-life, plastic cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
100 mm
Bore diameter
D
180 mm
Outside diameter
B
34 mm
Width
Cr
142,000 N
Basic dynamic load rating, radial
C0r
124,000 N
Basic static load rating, radial
Cur
7,300 N
Fatigue load limit, radial
nG
4,850 1/min
Limiting speed
nϑr
4,250 1/min
Reference speed
≈m
3.14 kg
Weight
Mounting dimensions
da min
112 mm
Minimum diameter of shaft shoulder
Da max
168 mm
Maximum diameter of housing shoulder
Db max
173 mm
Maximum diameter of housing shoulder
ra max
2.1 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7220-B-XL-TVP-UA Angular Contact Ball Bearing Overview
The 7220-B-XL-TVP-UA is an FAG single-row angular contact ball bearing in the 72..-B-XL-TVP design. The supplied product information identifies it as an X-life bearing with a plastic cage and a 40° contact angle.
What are the main dimensions of the 7220-B-XL-TVP-UA?
- Bore diameter (d): 100 mm
- Outside diameter (D): 180 mm
- Width (B): 34 mm
- Weight: approximately 3.14 kg
Load and Speed Ratings for the FAG Bearing
The bearing data lists radial load ratings, a fatigue load limit, and speed values for the 7220-B-XL-TVP-UA. These values support comparison with other bearings using the same published rating basis.
What performance figures are provided?
- Basic dynamic load rating, radial (Cr): 142,000 N
- Basic static load rating, radial (C0r): 124,000 N
- Fatigue load limit, radial (Cur): 7,300 N
- Limiting speed (nG): 4,850 1/min
- Reference speed (nϑr): 4,250 1/min
Mounting, Geometry, and Temperature Information
The supplied data includes mounting dimensions, ring geometry, chamfer or fillet dimensions, and an operating temperature range. These details should be checked against the selected shaft, housing, and assembly arrangement.
What mounting and dimensional details are published?
- Shaft and housing shoulders: da min 112 mm; Da max 168 mm; Db max 173 mm
- Fillet radii: ra max 2.1 mm; ra1 max 1 mm
- Minimum chamfer dimensions: rmin 2.1 mm; r1 min 1.1 mm
- Additional geometry: D1 149.56 mm; d1 132.32 mm; a 75.7 mm; contact angle 40°
- Operating temperature range: -30 °C to 120 °C
