FAG 7320-B-XL-JP-UA
Angular contact ball bearing 73..-B-XL-JP, single row, X-life, steel sheet metal cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
100 mm
Bore diameter
D
215 mm
Outside diameter
B
47 mm
Width
Cr
214,000 N
Basic dynamic load rating, radial
C0r
197,000 N
Basic static load rating, radial
Cur
10,900 N
Fatigue load limit, radial
nG
4,050 1/min
Limiting speed
nϑr
3,550 1/min
Reference speed
≈m
7.592 kg
Weight
Mounting dimensions
da min
114 mm
Minimum diameter of shaft shoulder
Da max
201 mm
Maximum diameter of housing shoulder
Db max
208 mm
Maximum diameter of housing shoulder
ra max
2.5 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7320-B-XL-JP-UA Angular Contact Ball Bearing Introduction
What is the 7320-B-XL-JP-UA?
The 7320-B-XL-JP-UA is an FAG single row angular contact ball bearing in the 73..-B-XL-JP design. The supplied product data identifies it as an X-life bearing with a steel sheet metal cage.
- Brand: FAG
- Product series: Angular Contact Ball Bearings
- Model: 7320-B-XL-JP-UA
- Cage: Steel sheet metal cage
7320-B-XL-JP-UA Dimensions and Rated Performance
What main dimensions and performance figures are provided?
The bearing has a bore diameter of 100 mm, an outside diameter of 215 mm, and a width of 47 mm. Its listed weight is 7.592 kg.
- Basic dynamic load rating, radial (Cr): 214,000 N
- Basic static load rating, radial (C0r): 197,000 N
- Fatigue load limit, radial (Cur): 10,900 N
- Limiting speed (nG): 4,050 1/min
- Reference speed: 3,550 1/min
- Contact angle: 40°
Mounting, Geometry, and Temperature Data for 7320-B-XL-JP-UA
What installation and geometry details should be reviewed?
The supplied data includes mounting dimensions, bearing geometry, and operating temperature limits. Use these details when checking shaft, housing, fillet, and clearance-related requirements.
- Shaft shoulder minimum diameter (da min): 114 mm
- Housing shoulder maximum diameter (Da max): 201 mm
- Housing shoulder maximum diameter (Db max): 208 mm
- Maximum shaft fillet radius (ra max): 2.5 mm
- Maximum housing fillet radius (ra1 max): 1 mm
- Minimum chamfer dimensions: r min 3 mm; r1 min 1.1 mm
- Outer-ring shoulder diameter (D1): 171.72 mm
- Inner-ring shoulder diameter (d1): 146.26 mm
- Distance between pressure-cone apexes (a): 89.6 mm
- Operating temperature range: -30 °C to 150 °C
