FAG 7322-B-XL-TVP
Angular contact ball bearing 73..-B-XL-TVP, single row, X-life, plastic cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
110 mm
Bore diameter
D
240 mm
Outside diameter
B
50 mm
Width
Cr
250,000 N
Basic dynamic load rating, radial
C0r
245,000 N
Basic static load rating, radial
Cur
12,800 N
Fatigue load limit, radial
nG
3,650 1/min
Limiting speed
nϑr
3,150 1/min
Reference speed
≈m
9.74 kg
Weight
Mounting dimensions
da min
124 mm
Minimum diameter of shaft shoulder
Da max
226 mm
Maximum diameter of housing shoulder
Db max
233 mm
Maximum diameter of housing shoulder
ra max
2.5 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7322-B-XL-TVP Angular Contact Ball Bearing Basics
The FAG 7322-B-XL-TVP is part of the Angular Contact Ball Bearings series and is listed under the category path Brand > FAG > Ball Bearings > Angular Contact Ball Bearings. The supplied product title identifies it as a single-row angular contact ball bearing with an X-life design and a plastic cage.
What are the main dimensions of the 7322-B-XL-TVP?
- Bore diameter (d): 110 mm
- Outside diameter (D): 240 mm
- Width (B): 50 mm
- Weight: 9.74 kg
Rated Performance and Speed Data for the 7322-B-XL-TVP
The bearing data includes radial load ratings, a fatigue load limit, and speed values. The contact angle is specified as 40 degrees, and the temperature range spans from -30 degrees C to 120 degrees C operating temperature.
What load and speed values are provided for this bearing?
- Basic dynamic load rating, radial (Cr): 250,000 N
- Basic static load rating, radial (C0r): 245,000 N
- Fatigue load limit, radial (Cur): 12,800 N
- Limiting speed (nG): 3,650 1/min
- Reference speed: 3,150 1/min
- Contact angle: 40 degrees
Mounting and Geometry Details for the FAG 7322-B-XL-TVP
The supplied mounting and dimensional data list shoulder limits, fillet radii, chamfer dimensions, and pressure-cone geometry. These details can be used alongside the specified shaft and housing interface requirements.
Which mounting and dimensional figures should be reviewed?
- Shaft shoulder diameter minimum (da min): 124 mm
- Housing shoulder diameter maximum (Da max): 226 mm
- Housing shoulder diameter maximum (Db max): 233 mm
- Shaft maximum fillet radius (ra max): 2.5 mm
- Housing maximum fillet radius (ra1 max): 1 mm
- Minimum chamfer dimensions: r min 3 mm; r1 min 1.1 mm
- Additional geometry: D1 190.9 mm, d1 162.34 mm, and a 98.4 mm distance between the apexes of the pressure cones
