FAG 7324-B-XL-MP-UA
Angular contact ball bearing 73..-B-XL-MP, single row, X-life, solid brass cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
120 mm
Bore diameter
D
260 mm
Outside diameter
B
55 mm
Width
Cr
275,000 N
Basic dynamic load rating, radial
C0r
285,000 N
Basic static load rating, radial
Cur
14,300 N
Fatigue load limit, radial
nG
4,350 1/min
Limiting speed
nϑr
2,850 1/min
Reference speed
≈m
14.05 kg
Weight
Mounting dimensions
da min
134 mm
Minimum diameter of shaft shoulder
Da max
246 mm
Maximum diameter of housing shoulder
Db max
253 mm
Maximum diameter of housing shoulder
ra max
2.5 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7324-B-XL-MP-UA Angular Contact Ball Bearing Overview
What is the 7324-B-XL-MP-UA?
The 7324-B-XL-MP-UA is an FAG angular contact ball bearing in the 73..-B-XL-MP series. Product data identifies it as a single-row, X-life bearing with a solid brass cage.
- Brand: FAG
- Product series: Angular Contact Ball Bearings
- Category: Brand > FAG > Ball Bearings > Angular Contact Ball Bearings
- Main dimensions: 120 mm bore, 260 mm outside diameter, and 55 mm width
7324-B-XL-MP-UA Dimensions and Performance Data
What dimensions and load values are listed for this bearing?
The supplied product data lists the following main dimensions and radial load ratings:
- Bore diameter d: 120 mm
- Outside diameter D: 260 mm
- Width B: 55 mm
- Basic dynamic load rating Cr: 275,000 N
- Basic static load rating C0r: 285,000 N
- Fatigue load limit Cur: 14,300 N
- Limiting speed nG: 4,350 1/min
- Reference speed nϑr: 2,850 1/min
- Weight: approximately 14.05 kg
Mounting, Geometry, and Temperature Details
What mounting and geometric specifications should be reviewed?
The bearing data includes mounting dimensions, internal geometry, contact angle, and operating temperature limits. These values should be reviewed against the intended shaft, housing, and surrounding assembly requirements.
- Shaft shoulder diameter da min: 134 mm
- Housing shoulder diameter Da max: 246 mm
- Housing shoulder diameter Db max: 253 mm
- Shaft fillet radius ra max: 2.5 mm
- Housing fillet radius ra1 max: 1 mm
- Minimum chamfer dimensions: rmin 3 mm; r1 min 1.1 mm
- Outer-ring shoulder diameter D1: 207.1 mm
- Inner-ring shoulder diameter d1: 176.38 mm
- Pressure-cone apex distance a: 107.2 mm
- Contact angle α: 40°
- Operating temperature range: -30 °C to 200 °C
