FAG 7226-B-XL-TVP
Angular contact ball bearing 72..-B-XL-TVP, single row, X-life, plastic cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
130 mm
Bore diameter
D
230 mm
Outside diameter
B
40 mm
Width
Cr
200,000 N
Basic dynamic load rating, radial
C0r
204,000 N
Basic static load rating, radial
Cur
10,600 N
Fatigue load limit, radial
nG
3,750 1/min
Limiting speed
nϑr
3,350 1/min
Reference speed
≈m
6.1 kg
Weight
Mounting dimensions
da min
144 mm
Minimum diameter of shaft shoulder
Da max
216 mm
Maximum diameter of housing shoulder
Db max
223 mm
Maximum diameter of housing shoulder
ra max
2.5 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7226-B-XL-TVP Angular Contact Ball Bearing Overview
The FAG 7226-B-XL-TVP is part of the Angular Contact Ball Bearings product series. The supplied data identifies it as a single row, X-life angular contact ball bearing with a plastic cage.
What are the main dimensions of the 7226-B-XL-TVP?
- Bore diameter (d): 130 mm
- Outside diameter (D): 230 mm
- Width (B): 40 mm
- Weight: approximately 6.1 kg
Load, Speed, and Temperature Data for the 7226-B-XL-TVP
The product data lists radial load ratings, fatigue load limit, speed values, and operating temperature boundaries for this FAG bearing.
What performance values are provided for the FAG 7226-B-XL-TVP?
- Basic dynamic load rating, radial (Cr): 200,000 N
- Basic static load rating, radial (C0r): 204,000 N
- Fatigue load limit, radial (Cur): 10,600 N
- Limiting speed (nG): 3,750 1/min
- Reference speed (nϑr): 3,350 1/min
- Operating temperature range: -30 °C to 120 °C
Mounting and Geometry Details for the 7226-B-XL-TVP
The supplied mounting and dimensional data can be used when checking fitment against adjacent shaft and housing geometry.
What mounting and geometry dimensions are documented?
- Shaft shoulder minimum diameter (da min): 144 mm; housing shoulder maximum diameter (Da max): 216 mm
- Additional housing shoulder maximum diameter (Db max): 223 mm
- Maximum shaft fillet radius (ra max): 2.5 mm; maximum housing fillet radius (ra1 max): 1 mm
- Minimum chamfer dimensions: r min 3 mm and r1 min 1.1 mm
- Shoulder diameters: D1 191.8 mm on the outer ring wide side face and d1 169.64 mm on the inner ring wide side face
- Pressure cone apex distance (a): 95.5 mm; contact angle: 40°
