FAG 7326-B-XL-MP-UO
Angular contact ball bearing 73..-B-XL-MP, single row, X-life, solid brass cage
Main Dimensions & Performance Data
Mounting dimensions
FAG 7326-B-XL-MP-UO Angular Contact Ball Bearing Overview
The 7326-B-XL-MP-UO is an FAG single row angular contact ball bearing in the 73..-B-XL-MP series. The supplied product data identifies it as an X-life bearing with a solid brass cage and a 40° contact angle.
What are the model and bearing type?
This is an FAG angular contact ball bearing with model designation 7326-B-XL-MP-UO. It belongs to the Angular Contact Ball Bearings product series and is listed under FAG ball bearings.
7326-B-XL-MP-UO Dimensions and Load Ratings
The bearing has main dimensions of 130 mm bore, 280 mm outside diameter, and 58 mm width. The supplied radial load ratings are 305,000 N dynamic and 325,000 N static, with a fatigue load limit of 15,900 N.
- Bore diameter (d): 130 mm
- Outside diameter (D): 280 mm
- Width (B): 58 mm
- Basic dynamic load rating, radial (Cr): 305,000 N
- Basic static load rating, radial (C0r): 325,000 N
- Fatigue load limit, radial (Cur): 15,900 N
- Weight: approximately 17.5 kg
What speed and contact-angle data are provided?
The listed limiting speed is 4,000 1/min, and the reference speed is 2,600 1/min. Product data also lists the contact angle as 40° and the distance between the apexes of the pressure cones as 115 mm.
Mounting, Temperature, and Geometry Details
The supplied mounting data includes shaft and housing shoulder dimensions, fillet limits, chamfer dimensions, and shoulder diameters for installation reference. The stated operating temperature range is -30 °C to 200 °C.
- Shaft shoulder minimum diameter (da min): 147 mm
- Housing shoulder maximum diameter (Da max): 263 mm
- Housing shoulder maximum diameter (Db max): 271 mm
- Maximum shaft fillet radius (ra max): 3 mm
- Maximum housing fillet radius (ra1 max): 1.5 mm
- Minimum chamfer dimensions: rmin 4 mm; r1 min 1.5 mm
What additional geometry values are specified?
The data lists a shoulder diameter on the outer ring wide side face (D1) of 222.5 mm and a shoulder diameter on the inner ring wide side face (d1) of 188.5 mm. These details should be used with the bearing’s documented dimensions when evaluating fitment.
