71952-MP-UA
MORE +
CLOSE +
Angular contact ball bearing 719..-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

71952-MP-UA

Main Dimensions & Performance Data

d 260 mm Bore diameter
D 360 mm Outside diameter
B 46 mm Width
Cr 255,000 N Basic dynamic load rating, radial
C0r 375,000 N Basic static load rating, radial
Cur 12,300 N Fatigue load limit, radial
nG 2,600 1/min Limiting speed
nϑr 1,700 1/min Reference speed
≈m 13.5 kg Weight

Mounting dimensions

da min 270.2 mm Minimum diameter of shaft shoulder
Da max 349.8 mm Maximum diameter of housing shoulder
Db max 354 mm Maximum diameter of housing shoulder
ra max 2.1 mm Maximum fillet radius of shaft
ra1 max 1 mm Maximum fillet radius of housing

FAG 71952-MP-UA Angular Contact Ball Bearing Overview

What is the 71952-MP-UA?

The FAG 71952-MP-UA is a single-row angular contact ball bearing in the FAG angular contact ball bearing series. The supplied product information identifies it as a 719..-MP bearing with a solid brass cage and a 30° contact angle.

  • Brand: FAG
  • Series: Angular Contact Ball Bearings
  • Model: 71952-MP-UA
  • Cage: Solid brass cage
  • Arrangement: Single row

71952-MP-UA Dimensions and Performance Data

What dimensions and ratings are listed for this bearing?

The bearing has a bore diameter of 260 mm, an outside diameter of 360 mm, and a width of 46 mm. The listed weight is approximately 13.5 kg.

  • Basic dynamic load rating, radial (Cr): 255,000 N
  • Basic static load rating, radial (C0r): 375,000 N
  • Fatigue load limit, radial (Cur): 12,300 N
  • Limiting speed (nG): 2,600 1/min
  • Reference speed: 1,700 1/min

Mounting, Geometry, and Temperature Details

What mounting and operating data should be reviewed?

The supplied data includes mounting dimensions, bearing geometry, chamfer dimensions, and an operating temperature range from -30 °C to 200 °C.

  1. Shaft shoulder: da min 270.2 mm
  2. Housing shoulder: Da max 349.8 mm; Db max 354 mm
  3. Fillet radii: ra max 2.1 mm; ra1 max 1 mm
  4. Minimum chamfer dimensions: r min 2.1 mm; r1 min 1.1 mm
  5. Additional geometry: D1 324.05 mm, d1 298.15 mm, a 112.5 mm

Use these values together with the full assembly requirements when evaluating the 71952-MP-UA.

Similar to product

71952-MP-UA