The 7264-B-MP is an FAG angular contact ball bearing in the 72..-B-MP series. Product information identifies it as a single-row bearing with a solid brass cage. Its listed main dimensions are a 320 mm bore, 580 mm outside diameter, and 92 mm width, with an approximate mass of 92.5 kg.
The bearing is branded FAG and classified within angular contact ball bearings. The supplied dimensions are: bore diameter d = 320 mm, outside diameter D = 580 mm, and width B = 92 mm.
The product data lists radial basic dynamic load rating Cr = 610,000 N, radial basic static load rating C0r = 1,190,000 N, and radial fatigue load limit Cur = 29,000 N. The limiting speed is 1,660 1/min, the reference speed is 1,120 1/min, and the stated operating temperature range is -30 °C to 200 °C.
The supplied figures should be used as published product data rather than as application-specific recommendations.
Mounting dimensions list a minimum shaft shoulder diameter of 340 mm, maximum housing shoulder diameters of 560 mm and 569 mm, and maximum fillet radii of 4 mm for the shaft and 2 mm for the housing. Geometry data includes a 40° contact angle and specified shoulder and pressure-cone dimensions.
The supplied data includes the following installation-related measurements: