71968-MP
MORE +
CLOSE +
Angular contact ball bearing 719..-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

71968-MP

Main Dimensions & Performance Data

d 340 mm Bore diameter
D 460 mm Outside diameter
B 56 mm Width
Cr 340,000 N Basic dynamic load rating, radial
C0r 580,000 N Basic static load rating, radial
Cur 17,900 N Fatigue load limit, radial
nG 2,010 1/min Limiting speed
nϑr 1,250 1/min Reference speed
≈m 22.7 kg Weight

Mounting dimensions

da min 352.4 mm Minimum diameter of shaft shoulder
Da max 447.6 mm Maximum diameter of housing shoulder
Db max 454 mm Maximum diameter of housing shoulder
ra max 2.5 mm Maximum fillet radius of shaft
ra1 max 1 mm Maximum fillet radius of housing

FAG 71968-MP Angular Contact Ball Bearing Overview

The FAG 71968-MP is part of the FAG Angular Contact Ball Bearings series and is identified as a single row angular contact ball bearing with a solid brass cage.

What are the basic dimensions of the 71968-MP?

  • Bore diameter (d): 340 mm
  • Outside diameter (D): 460 mm
  • Width (B): 56 mm
  • Weight: approximately 22.7 kg
  • Contact angle: 30°

71968-MP Performance and Temperature Data

The supplied product data lists radial load ratings, fatigue load limit, speed values, and operating temperature boundaries for the FAG 71968-MP bearing.

What load and speed values are provided for this FAG bearing?

  • Basic dynamic load rating, radial (Cr): 340,000 N
  • Basic static load rating, radial (C0r): 580,000 N
  • Fatigue load limit, radial (Cur): 17,900 N
  • Limiting speed (nG): 2,010 1/min
  • Reference speed (nϑr): 1,250 1/min
  • Operating temperature range: -30 °C to 200 °C

Mounting and Geometry Details for the 71968-MP

The 71968-MP data includes mounting shoulder dimensions, fillet limits, chamfer dimensions, and ring shoulder measurements to support engineering review.

What mounting dimensions should be reviewed for installation?

  1. Shaft shoulder minimum diameter (da min): 352.4 mm
  2. Housing shoulder maximum diameter (Da max): 447.6 mm
  3. Housing shoulder maximum diameter (Db max): 454 mm
  4. Maximum shaft fillet radius (ra max): 2.5 mm
  5. Maximum housing fillet radius (ra1 max): 1 mm
  6. Minimum chamfer dimensions: rmin 3 mm; r1 min 1.1 mm
  7. Additional geometry: D1 412.6 mm, d1 385.3 mm, and distance between pressure-cone apexes (a) 143.5 mm

Similar to product

71968-MP