719/500-MP
MORE +
CLOSE +
Angular contact ball bearing 719..-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

719/500-MP

Main Dimensions & Performance Data

d 500 mm Bore diameter
D 670 mm Outside diameter
B 78 mm Width
Cr 550,000 N Basic dynamic load rating, radial
C0r 1,180,000 N Basic static load rating, radial
Cur 28,000 N Fatigue load limit, radial
nG 1,340 1/min Limiting speed
nϑr 790 1/min Reference speed
≈m 73.7 kg Weight

Mounting dimensions

da min 518 mm Minimum diameter of shaft shoulder
Da max 652 mm Maximum diameter of housing shoulder
Db max 661.2 mm Maximum diameter of housing shoulder
ra max 4 mm Maximum fillet radius of shaft
ra1 max 2 mm Maximum fillet radius of housing

FAG 719/500-MP Angular Contact Ball Bearing Overview

The 719/500-MP is an FAG single row angular contact ball bearing in the Angular Contact Ball Bearings series. The supplied product title identifies it as a 719..-MP bearing with a solid brass cage.

What are the basic dimensions of the 719/500-MP?

  • Bore diameter (d): 500 mm
  • Outside diameter (D): 670 mm
  • Width (B): 78 mm
  • Weight: approximately 73.7 kg

719/500-MP Load, Speed, and Temperature Data

The supplied performance data lists radial load ratings, fatigue load limit, speed values, contact angle, and operating temperature boundaries for the FAG 719/500-MP bearing.

What performance values are provided for the FAG bearing?

  • Basic dynamic load rating, radial (Cr): 550,000 N
  • Basic static load rating, radial (C0r): 1,180,000 N
  • Fatigue load limit, radial (Cur): 28,000 N
  • Limiting speed (nG): 1,340 1/min
  • Reference speed: 790 1/min
  • Contact angle: 30°
  • Operating temperature range: -30 °C to 200 °C

Mounting and Geometry Details for the 719/500-MP

The product data includes mounting dimensions, shoulder dimensions, fillet limits, chamfer dimensions, and the pressure-cone apex distance for installation planning and dimensional reference.

What mounting and geometric dimensions are listed?

  1. Shaft shoulder minimum diameter (da min): 518 mm
  2. Housing shoulder maximum diameter (Da max): 652 mm
  3. Housing shoulder maximum diameter (Db max): 661.2 mm
  4. Maximum shaft fillet radius (ra max): 4 mm
  5. Maximum housing fillet radius (ra1 max): 2 mm
  6. Minimum chamfer dimensions: r min 5 mm; r1 min 2 mm
  7. Shoulder diameters: D1 607.8 mm on the outer ring wide side face; d1 566 mm on the inner ring wide side face
  8. Distance between pressure-cone apexes (a): 207.9 mm

Similar to product

719/500-MP