718/750-MPB
MORE +
CLOSE +
Angular contact ball bearing 718..-MPB, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

718/750-MPB

Main Dimensions & Performance Data

d 750 mm Bore diameter
D 920 mm Outside diameter
B 78 mm Width
Cr 640,000 N Basic dynamic load rating, radial
C0r 1,630,000 N Basic static load rating, radial
Cur 32,000 N Fatigue load limit, radial
nG 940 1/min Limiting speed
nϑr 485 1/min Reference speed
≈m 111 kg Weight

Mounting dimensions

da min 768 mm Minimum diameter of shaft shoulder
Da max 902 mm Maximum diameter of housing shoulder
Db max 911.2 mm Maximum diameter of housing shoulder
ra max 4 mm Maximum fillet radius of shaft
ra1 max 2 mm Maximum fillet radius of housing

FAG 718/750-MPB Angular Contact Ball Bearing Introduction

The FAG 718/750-MPB is a single row angular contact ball bearing in the FAG angular contact ball bearing series. The supplied product information identifies a solid brass cage and a 30° contact angle.

What are the bearing's basic dimensions?

The 718/750-MPB has a bore diameter of 750 mm, an outside diameter of 920 mm, and a width of 78 mm. Its listed mass is approximately 111 kg.

718/750-MPB Load and Speed Data

The bearing data includes radial load ratings and speed values for reference. The basic dynamic load rating is 640,000 N, the basic static load rating is 1,630,000 N, and the fatigue load limit is 32,000 N.

What speed and temperature values are provided?

The listed limiting speed is 940 1/min, and the reference speed is 485 1/min. The operating temperature range is from -30 °C to 200 °C.

Mounting and Geometry Details for the 718/750-MPB

The supplied mounting data lists shaft and housing shoulder dimensions, fillet limits, chamfer dimensions, and ring shoulder diameters to support installation planning based on the manufacturer data.

  • Shaft shoulder: da min 768 mm
  • Housing shoulder: Da max 902 mm; Db max 911.2 mm
  • Fillet radii: ra max 4 mm; ra1 max 2 mm
  • Minimum chamfer dimensions: rmin 5 mm; r1 min 2 mm
  • Shoulder diameters: D1 857.45 mm; d1 814.9 mm
  • Pressure cone apex distance: a 280 mm

What category and design information applies to this bearing?

The product is categorized under Brand > FAG > Ball Bearings > Angular Contact Ball Bearings. It is described as an angular contact ball bearing, single row, with a solid brass cage.

Similar to product

718/750-MPB