7004-B-XL-TVP
MORE +
CLOSE +

FAG 7004-B-XL-TVP Angular Contact Ball Bearings

Angular contact ball bearing 70..-B-XL-TVP, single row, X-life, plastic cage

(BRAND): FAG
(Availability):In Stock

Detailed data of 7004-B-XL-TVP Angular Contact Ball Bearings

Main Dimensions & Performance Data

d 20 mm Bore diameter
D 42 mm Outside diameter
B 12 mm Width
Cr 14,500 N Basic dynamic load rating, radial
C0r 8,000 N Basic static load rating, radial
Cur 560 N Fatigue load limit, radial
nG 22,600 1/min Limiting speed
nϑr 14,400 1/min Reference speed
≈m 60 g Weight

Mounting dimensions

da min 23.2 mm Minimum diameter of shaft shoulder
Da max 38.8 mm Maximum diameter of housing shoulder
Db max 40 mm Maximum diameter of housing shoulder
ra max 0.6 mm Maximum fillet radius of shaft
ra1 max 0.3 mm Maximum fillet radius of housing

FAG 7004-B-XL-TVP Angular Contact Ball Bearing Introduction

The 7004-B-XL-TVP is a FAG single row angular contact ball bearing in the Angular Contact Ball Bearings series. The supplied product title identifies it as an X-life bearing with a plastic cage. Its category path is Brand > FAG > Ball Bearings > Angular Contact Ball Bearings.

What are the model and basic dimensions?

The bearing has a bore diameter of 20 mm, an outside diameter of 42 mm, and a width of 12 mm. The listed approximate weight is 60 g.

7004-B-XL-TVP Load, Speed, and Temperature Data

The supplied performance data lists a basic dynamic radial load rating of 14,500 N, a basic static radial load rating of 8,000 N, and a radial fatigue load limit of 560 N. The limiting speed is 22,600 1/min and the reference speed is 14,400 1/min.

What operating temperature range is provided?

The listed operating temperature range is from -30 °C minimum to 120 °C maximum. These values are taken from the supplied product data.

Mounting and Dimensional Details for the FAG Bearing

The mounting data includes minimum and maximum shoulder dimensions, fillet limits, chamfer dimensions, ring-related diameters, and a 40° contact angle. These details can be checked against the mating shaft and housing arrangement during design or installation review.

What mounting and geometry values are specified?

  • Mounting dimensions: da min 23.2 mm; Da max 38.8 mm; Db max 40 mm; ra max 0.6 mm; ra1 max 0.3 mm.
  • Chamfer dimensions: r min 0.6 mm; r1 min 0.3 mm.
  • Additional geometry: D1 34.82 mm; D2 35.5 mm; D3 39.8 mm; d1 28.94 mm; d2 26.52 mm; a 19.4 mm; contact angle 40°.

Similar to product FAG 7004-B-XL-TVP Angular Contact Ball Bearings