IKO NAG4917
Roller Bearings, Full Complement, High Carbon Steel, Oil Hole
IKO NAG4917 Roller Bearing Overview
The IKO NAG4917 is part of the Roller Bearings product series. It is identified as a full complement bearing made from high carbon chrome steel, and its product details include an oil hole.
What bearing type and structure does the NAG4917 use?
The supplied data classifies the NAG4917 as Roller Bearings with a Full Complement internal structure. It is listed under the brand path: Brand > IKO > Roller Bearings.
NAG4917 Dimensions and Measured Data
The bearing data lists the following dimensional and mass values:
- Shaft diameter: 85 mm
- Inside diameter: 85 mm
- Outer diameter: 120 mm
- Width: 35 mm
- rs min.: 1.5 mm
- Additional diameters: 96.0 mm and 110.0 mm
- Mass: 1190.000 g
What are the bore, outside diameter, and width?
The NAG4917 has an 85 mm inside diameter and shaft diameter, a 120 mm outer diameter, and a 35 mm width. These values should be checked against the mating component requirements before selection.
NAG4917 Load Ratings and Material Details
The supplied product data provides the bearing material and basic load ratings. The listed material is High Carbon Chrome Steel, while the detail title describes the bearing as high carbon steel with an oil hole.
- Basic dynamic load rating: 111000 N
- Basic static load rating: 200000 N
What load ratings are recorded for this bearing?
The NAG4917 data lists a basic dynamic load rating of 111000 N and a basic static load rating of 200000 N. The data does not specify an application or service life, so load suitability should be assessed using the relevant engineering requirements.
