3201-BB-TVH
MORE +
CLOSE +
Angular contact ball bearing 32..-B-TVH, double row, plastic cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

3201-BB-TVH

Main Dimensions & Performance Data

d 12 mm Bore diameter
D 32 mm Outside diameter
B 15.9 mm Width
Cr 10,500 N Basic dynamic load rating, radial
C0r 5,800 N Basic static load rating, radial
Cur 300 N Fatigue load limit, radial
nG 18,400 1/min Limiting speed
nϑr 20,000 1/min Reference speed
≈m 0.054 kg Weight

Mounting dimensions

da min 16.2 mm Minimum diameter shaft shoulder
Da max 27.8 mm Maximum diameter of housing shoulder
ra max 0.6 mm Maximum fillet radius

FAG 3201-BB-TVH Angular Contact Ball Bearing Overview

The FAG 3201-BB-TVH is part of the FAG Angular Contact Ball Bearings series and is categorized under Brand > FAG > Ball Bearings > Angular Contact Ball Bearings. The product introduction identifies it as an angular contact ball bearing from the 32..-B-TVH design range, with a double-row arrangement and a plastic cage.

What is the basic bearing configuration?

The supplied data describes the 3201-BB-TVH as a double-row angular contact ball bearing with a plastic cage. It has a bore diameter of 12 mm, an outside diameter of 32 mm, and a width of 15.9 mm.

Published Dimensions and Load Ratings

The main performance data lists a basic dynamic radial load rating of 10,500 N, a basic static radial load rating of 5,800 N, and a radial fatigue load limit of 300 N. The bearing weight is listed as approximately 0.054 kg.

  • Bore diameter (d): 12 mm
  • Outside diameter (D): 32 mm
  • Width (B): 15.9 mm
  • Dynamic load rating (Cr): 10,500 N
  • Static load rating (C0r): 5,800 N
  • Fatigue load limit (Cur): 300 N

What speed and temperature values are provided?

The data lists a limiting speed of 18,400 1/min, a reference speed of 20,000 1/min, and an operating temperature range from -20 °C to 120 °C. These values should be used with the complete published bearing documentation.

Mounting and Geometry Data for the 3201-BB-TVH

The mounting dimensions include a minimum shaft shoulder diameter of 16.2 mm, a maximum housing shoulder diameter of 27.8 mm, and a maximum fillet radius of 0.6 mm. The detailed bearing geometry also lists a 25° contact angle and additional ring and shoulder dimensions.

  1. Minimum shaft shoulder (da min): 16.2 mm
  2. Maximum housing shoulder (Da max): 27.8 mm
  3. Maximum fillet radius (ra max): 0.6 mm
  4. Minimum chamfer dimension (rmin): 0.6 mm
  5. Outer ring shoulder diameter (D1): 25.99 mm
  6. Outer ring caliber diameter (D2): 27.77 mm
  7. Inner ring shoulder diameter (d1): 17.8 mm
  8. Inner ring caliber diameter (d2): 17.2 mm
  9. Pressure cone apex distance (a): 16.5 mm
  10. Contact angle: 25°

What mounting checks should be based on the supplied dimensions?

The supplied shoulder and fillet dimensions can be used to review shaft and housing geometry against the bearing data. The listed minimum shaft shoulder, maximum housing shoulder, and maximum fillet radius should be considered before installation.

Similar to product

3201-BB-TVH