3304-BD-XL-C3
MORE +
CLOSE +

FAG 3304-BD-XL-C3 Angular Contact Ball Bearings

Angular contact ball bearing 33..-BD-XL, double row, X-life, steel sheet metal cage

(BRAND): FAG
(Availability):In Stock

Detailed data of 3304-BD-XL-C3 Angular Contact Ball Bearings

Main Dimensions & Performance Data

d 20 mm Bore diameter
D 52 mm Outside diameter
B 22.2 mm Width
Cr 24,600 N Basic dynamic load rating, radial
C0r 15,900 N Basic static load rating, radial
Cur 1,100 N Fatigue load limit, radial
nG 14,700 1/min Limiting speed
nϑr 10,400 1/min Reference speed
≈m 0.211 kg Weight

Mounting dimensions

da min 27 mm Minimum diameter shaft shoulder
Da max 45 mm Maximum diameter of housing shoulder
ra max 1 mm Maximum fillet radius

FAG 3304-BD-XL-C3 Angular Contact Ball Bearing Introduction

The 3304-BD-XL-C3 is an FAG angular contact ball bearing in the double-row 33..-BD-XL design, identified as an X-life bearing with a steel sheet metal cage. Its main dimensions are a 20 mm bore, 52 mm outside diameter, and 22.2 mm width, with an approximate mass of 0.211 kg.

What bearing type and basic dimensions apply to this model?

The product is classified under FAG ball bearings as an angular contact ball bearing. Its stated dimensions are d = 20 mm, D = 52 mm, and B = 22.2 mm.

3304-BD-XL-C3 Load and Speed Data

The supplied performance data lists a basic radial dynamic load rating of 24,600 N, a basic radial static load rating of 15,900 N, and a radial fatigue load limit of 1,100 N. The limiting speed is 14,700 1/min, and the reference speed is 10,400 1/min.

What load ratings and speed values are provided?

  • Cr: 24,600 N
  • C0r: 15,900 N
  • Cur: 1,100 N
  • Limiting speed nG: 14,700 1/min
  • Reference speed: 10,400 1/min

3304-BD-XL-C3 Mounting and Geometry Details

Mounting data includes a minimum shaft shoulder diameter of 27 mm, maximum housing shoulder diameter of 45 mm, and maximum fillet radius of 1 mm. The bearing also has specified geometry values including a 30° contact angle and operating temperature range from -30 °C to 120 °C.

What installation-related dimensions should be reviewed?

Use the supplied mounting dimensions when checking fitment: da min = 27 mm, Da max = 45 mm, and ra max = 1 mm. Additional stated values include rmin = 1.1 mm, D1 = 43.98 mm, D2 = 46.14 mm, d1 = 33.52 mm, d2 = 31.94 mm, and a = 30.4 mm.

Similar to product FAG 3304-BD-XL-C3 Angular Contact Ball Bearings