71888-MP
MORE +
CLOSE +
Angular contact ball bearing 718..-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

71888-MP

Main Dimensions & Performance Data

d 440 mm Bore diameter
D 540 mm Outside diameter
B 46 mm Width
Cr 310,000 N Basic dynamic load rating, radial
C0r 570,000 N Basic static load rating, radial
Cur 14,900 N Fatigue load limit, radial
nG 1,670 1/min Limiting speed
nϑr 910 1/min Reference speed
≈m 22.1 kg Weight

Mounting dimensions

da min 450.2 mm Minimum diameter of shaft shoulder
Da max 529.8 mm Maximum diameter of housing shoulder
Db max 534 mm Maximum diameter of housing shoulder
ra max 2.1 mm Maximum fillet radius of shaft
ra1 max 1 mm Maximum fillet radius of housing

FAG 71888-MP Angular Contact Ball Bearing Basics

The 71888-MP is an FAG single row angular contact ball bearing in the angular contact ball bearing series. The supplied product data identifies it with a solid brass cage and a 30° contact angle.

What are the model and brand details?

The bearing is branded FAG, identified by model 71888-MP, and listed under Angular Contact Ball Bearings.

Confirmed Main Dimensions and Performance Values

The bearing has a 440 mm bore diameter, 540 mm outside diameter, and 46 mm width. Its listed mass is 22.1 kg.

  • Basic dynamic load rating, radial (Cr): 310,000 N
  • Basic static load rating, radial (C0r): 570,000 N
  • Fatigue load limit, radial (Cur): 14,900 N
  • Limiting speed (nG): 1,670 1/min
  • Reference speed (nϑr): 910 1/min

What operating temperature range is stated?

The supplied data lists a minimum operating temperature of -30 °C and a maximum operating temperature of 200 °C.

Mounting and Geometric Reference Data

The supplied mounting dimensions and geometric values can be used for installation planning where they apply to the selected shaft and housing arrangement.

  1. Shaft shoulder minimum diameter (da min): 450.2 mm
  2. Housing shoulder maximum diameter (Da max): 529.8 mm
  3. Housing shoulder maximum diameter (Db max): 534 mm
  4. Maximum shaft fillet radius (ra max): 2.1 mm
  5. Maximum housing fillet radius (ra1 max): 1 mm
  6. Minimum chamfer dimensions: rmin 2.1 mm; r1 min 1.1 mm
  7. Additional geometry: D1 503.6 mm, d1 478.4 mm, a 164.5 mm

What contact angle and shoulder data are provided?

The bearing has a listed contact angle of 30°. The outer-ring shoulder diameter on the wide side face is 503.6 mm, and the inner-ring shoulder diameter on the wide side face is 478.4 mm.

Similar to product

71888-MP