71972-MP
MORE +
CLOSE +
Angular contact ball bearing 719..-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

71972-MP

Main Dimensions & Performance Data

d 360 mm Bore diameter
D 480 mm Outside diameter
B 56 mm Width
Cr 345,000 N Basic dynamic load rating, radial
C0r 600,000 N Basic static load rating, radial
Cur 17,300 N Fatigue load limit, radial
nG 1,910 1/min Limiting speed
nϑr 1,170 1/min Reference speed
≈m 23 kg Weight

Mounting dimensions

da min 372.4 mm Minimum diameter of shaft shoulder
Da max 467.6 mm Maximum diameter of housing shoulder
Db max 474 mm Maximum diameter of housing shoulder
ra max 2.5 mm Maximum fillet radius of shaft
ra1 max 1 mm Maximum fillet radius of housing

FAG 71972-MP Angular Contact Ball Bearing Overview

The 71972-MP is an FAG single row angular contact ball bearing in the angular contact ball bearings product series. The supplied product information identifies it with a solid brass cage and a 30° contact angle.

What are the basic dimensions of the 71972-MP?

The bearing has a bore diameter of 360 mm, an outside diameter of 480 mm, and a width of 56 mm. The listed mass is approximately 23 kg.

71972-MP Performance and Load Data

The supplied performance data lists radial load ratings and speed values for the FAG 71972-MP bearing.

  • Basic dynamic load rating, radial (Cr): 345,000 N
  • Basic static load rating, radial (C0r): 600,000 N
  • Fatigue load limit, radial (Cur): 17,300 N
  • Limiting speed (nG): 1,910 1/min
  • Reference speed (nϑr): 1,170 1/min

What operating temperature range is listed?

The product data lists an operating temperature minimum of -30 °C and an operating temperature maximum of 200 °C.

71972-MP Mounting and Geometry Details

The FAG 71972-MP includes specified mounting dimensions, chamfer dimensions, ring shoulder dimensions, and pressure-cone geometry for installation reference.

  1. Shaft shoulder minimum diameter (da min): 372.4 mm
  2. Housing shoulder maximum diameter (Da max): 467.6 mm
  3. Housing shoulder maximum diameter (Db max): 474 mm
  4. Maximum shaft fillet radius (ra max): 2.5 mm
  5. Maximum housing fillet radius (ra1 max): 1 mm

What additional geometry and chamfer data are provided?

The listed minimum chamfer dimensions are rmin 3 mm and r1 min 1.1 mm. Additional geometry includes D1 437.05 mm, d1 405.65 mm, and a distance between pressure-cone apexes of a 149.2 mm.

Similar to product

71972-MP