FAG 7219-B-XL-MP-UA
Angular contact ball bearing 72..-B-XL-MP, single row, X-life, solid brass cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
95 mm
Bore diameter
D
170 mm
Outside diameter
B
32 mm
Width
Cr
123,000 N
Basic dynamic load rating, radial
C0r
106,000 N
Basic static load rating, radial
Cur
6,400 N
Fatigue load limit, radial
nG
6,700 1/min
Limiting speed
nϑr
4,450 1/min
Reference speed
≈m
2.98 kg
Weight
Mounting dimensions
da min
107 mm
Minimum diameter of shaft shoulder
Da max
158 mm
Maximum diameter of housing shoulder
Db max
163 mm
Maximum diameter of housing shoulder
ra max
2.1 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7219-B-XL-MP-UA Angular Contact Ball Bearing Overview
The 7219-B-XL-MP-UA is an FAG angular contact ball bearing in the 72..-B-XL-MP series. The supplied data identifies it as a single-row, X-life bearing with a solid brass cage.
What are the basic dimensions of this bearing?
- Bore diameter: 95 mm
- Outside diameter: 170 mm
- Width: 32 mm
- Weight: 2.98 kg
7219-B-XL-MP-UA Load, Speed, and Temperature Data
The bearing data includes radial load ratings, limiting and reference speeds, and an operating temperature range. The contact angle is listed as 40 degrees.
What performance values are provided?
- Basic dynamic load rating, radial (Cr): 123,000 N
- Basic static load rating, radial (C0r): 106,000 N
- Fatigue load limit, radial (Cur): 6,400 N
- Limiting speed (nG): 6,700 1/min
- Reference speed: 4,450 1/min
- Operating temperature range: -30 °C to 150 °C
Mounting and Geometry Details for the FAG 7219-B-XL-MP-UA
The product data lists mounting shoulder limits, fillet radii, chamfer dimensions, and shoulder diameters to support installation planning.
What mounting and dimensional details are specified?
- Shaft shoulder minimum diameter (da min): 107 mm
- Housing shoulder maximum diameter (Da max): 158 mm
- Housing shoulder maximum diameter (Db max): 163 mm
- Maximum shaft fillet radius (ra max): 2.1 mm
- Maximum housing fillet radius (ra1 max): 1 mm
- Minimum chamfer dimensions: r min 2.1 mm; r1 min 1.1 mm
- Shoulder diameters: D1 141.5 mm; d1 125.3 mm
- Distance between pressure-cone apexes (a): 71.6 mm
