FAG 7226-B-XL-MP-UL

Angular Contact Ball Bearings

Angular contact ball bearing 72..-B-XL-MP, single row, X-life, solid brass cage

(BRAND)：FAG

(Availability)：In Stock

(EMAIL)：info@noksbearings.com

Detailed data of

7226-B-XL-MP-UL

Angular Contact Ball Bearings

Main Dimensions & Performance Data

d 130 mm Bore diameter

D 230 mm Outside diameter

B 40 mm Width

Cr 200,000 N Basic dynamic load rating, radial

C0r 204,000 N Basic static load rating, radial

Cur 10,600 N Fatigue load limit, radial

nG 4,850 1/min Limiting speed

nϑr 3,350 1/min Reference speed

≈m 7 kg Weight

Mounting dimensions

da min 144 mm Minimum diameter of shaft shoulder

Da max 216 mm Maximum diameter of housing shoulder

Db max 223 mm Maximum diameter of housing shoulder

ra max 2.5 mm Maximum fillet radius of shaft

ra1 max 1 mm Maximum fillet radius of housing

FAG 7226-B-XL-MP-UL Angular Contact Ball Bearing

What are the basic identification details for this bearing?

The 7226-B-XL-MP-UL is an FAG single row angular contact ball bearing in the 72..-B-XL-MP series. The supplied data identifies it as an X-life bearing with a solid brass cage and a 40° contact angle.

Brand: FAG
Product series: Angular Contact Ball Bearings
Configuration: Single row
Cage: Solid brass cage
Contact angle: 40°

Main Dimensions and Performance Values

What dimensions and load ratings are provided?

The bearing has a bore diameter of 130 mm, outside diameter of 230 mm, and width of 40 mm. The supplied weight is approximately 7 kg.

Basic dynamic load rating, radial (Cr): 200,000 N
Basic static load rating, radial (C0r): 204,000 N
Fatigue load limit, radial (Cur): 10,600 N
Limiting speed (nG): 4,850 1/min
Reference speed (nϑr): 3,350 1/min

Mounting, Geometry, and Temperature Data

What installation and operating parameters are listed in the product data?

The supplied mounting dimensions include a minimum shaft shoulder diameter of 144 mm, maximum housing shoulder diameter of 216 mm, and a 2.5 mm maximum shaft fillet radius. Additional geometry values include a 3 mm minimum chamfer dimension and a 95.5 mm distance between pressure-cone apexes.