FAG 7230-B-XL-MP-UA
Angular contact ball bearing 72..-B-XL-MP, single row, X-life, solid brass cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
150 mm
Bore diameter
D
270 mm
Outside diameter
B
45 mm
Width
Cr
245,000 N
Basic dynamic load rating, radial
C0r
275,000 N
Basic static load rating, radial
Cur
13,200 N
Fatigue load limit, radial
nG
4,100 1/min
Limiting speed
nϑr
2,850 1/min
Reference speed
≈m
10.991 kg
Weight
Mounting dimensions
da min
164 mm
Minimum diameter of shaft shoulder
Da max
256 mm
Maximum diameter of housing shoulder
Db max
263 mm
Maximum diameter of housing shoulder
ra max
2.5 mm
Maximum fillet radius of shaft
ra1 max
1 mm
Maximum fillet radius of housing
FAG 7230-B-XL-MP-UA Angular Contact Ball Bearing Overview
What is the 7230-B-XL-MP-UA?
The 7230-B-XL-MP-UA is an FAG single row angular contact ball bearing in the Angular Contact Ball Bearings series. The product identification describes a 72..-B-XL-MP X-life bearing with a solid brass cage.
- Brand: FAG
- Series: Angular Contact Ball Bearings
- Category: Brand > FAG > Ball Bearings > Angular Contact Ball Bearings
- Cage: Solid brass cage
7230-B-XL-MP-UA Dimensions and Performance Data
What dimensions and load ratings are listed?
The bearing has a bore diameter of 150 mm, outside diameter of 270 mm, and width of 45 mm. The listed weight is 10.991 kg.
- Basic dynamic load rating, radial (Cr): 245,000 N
- Basic static load rating, radial (C0r): 275,000 N
- Fatigue load limit, radial (Cur): 13,200 N
- Limiting speed (nG): 4,100 1/min
- Reference speed (nϑr): 2,850 1/min
7230-B-XL-MP-UA Mounting and Geometry Details
What mounting, contact, and temperature values are provided?
The listed mounting dimensions include shaft and housing shoulder limits, fillet limits, chamfer dimensions, and ring shoulder diameters. The stated contact angle is 40°, and the operating temperature range is -30 °C to 200 °C.
- Shaft shoulder: da min 164 mm
- Housing shoulder: Da max 256 mm; Db max 263 mm
- Fillet radii: ra max 2.5 mm; ra1 max 1 mm
- Minimum chamfer dimensions: rmin 3 mm; r1 min 1.1 mm
- Additional geometry: D1 223.5 mm; d1 197.5 mm; a 110.6 mm
