7240-B-MP-UA
MORE +
CLOSE +
Angular contact ball bearing 72..-B-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

7240-B-MP-UA

Main Dimensions & Performance Data

d 200 mm Bore diameter
D 360 mm Outside diameter
B 58 mm Width
Cr 325,000 N Basic dynamic load rating, radial
C0r 480,000 N Basic static load rating, radial
Cur 14,900 N Fatigue load limit, radial
nG 2,750 1/min Limiting speed
nϑr 1,990 1/min Reference speed
≈m 25.939 kg Weight

Mounting dimensions

da min 217 mm Minimum diameter of shaft shoulder
Da max 343 mm Maximum diameter of housing shoulder
Db max 351 mm Maximum diameter of housing shoulder
ra max 3 mm Maximum fillet radius of shaft
ra1 max 1.5 mm Maximum fillet radius of housing

FAG 7240-B-MP-UA Angular Contact Ball Bearing Overview

The 7240-B-MP-UA is an FAG angular contact ball bearing in the 72..-B-MP single-row design with a solid brass cage. Its listed main dimensions are a 200 mm bore, 360 mm outside diameter, and 58 mm width, with a recorded mass of approximately 25.939 kg.

What are the basic identifying details of this bearing?

The bearing is identified by model 7240-B-MP-UA, brand FAG, and product series Angular Contact Ball Bearings. The supplied description identifies it as a single-row angular contact ball bearing with a solid brass cage.

7240-B-MP-UA Dimensions and Load Ratings

The supplied performance data lists a radial basic dynamic load rating of 325,000 N, a radial basic static load rating of 480,000 N, and a radial fatigue load limit of 14,900 N. The bearing has a 40 degree contact angle and limiting and reference speeds of 2,750 1/min and 1,990 1/min respectively.

  • Bore diameter: 200 mm
  • Outside diameter: 360 mm
  • Width: 58 mm
  • Basic dynamic load rating, radial: 325,000 N
  • Basic static load rating, radial: 480,000 N
  • Fatigue load limit, radial: 14,900 N

What geometric dimensions are provided for engineering reference?

The product data includes shoulder and chamfer dimensions: D1 297.65 mm, d1 265.95 mm, distance between pressure-cone apexes a 146.5 mm, minimum chamfer rmin 4 mm, and r1 min 1.5 mm. The contact angle is listed as 40 degrees.

Mounting and Operating Data for the FAG Bearing

The mounting data lists shaft shoulder minimum diameter da min 217 mm, housing shoulder maximum diameter Da max 343 mm, Db max 351 mm, shaft fillet radius ra max 3 mm, and housing fillet radius ra1 max 1.5 mm. The operating temperature range is listed from -30 degrees C to 200 degrees C.

  1. Shaft shoulder: da min 217 mm
  2. Housing shoulder: Da max 343 mm; Db max 351 mm
  3. Fillet radii: ra max 3 mm; ra1 max 1.5 mm
  4. Temperature range: -30 degrees C to 200 degrees C

What should be checked against the supplied mounting dimensions?

Mating shaft and housing geometry should be compared with the listed shoulder diameters and maximum fillet radii. These values support dimensional review for the 7240-B-MP-UA; application suitability depends on the specific assembly requirements.

Similar to product

7240-B-MP-UA