7264-B-MP
MORE +
CLOSE +
Angular contact ball bearing 72..-B-MP, single row, solid brass cage
(BRAND):FAG
(Availability):In Stock

Detailed data of

7264-B-MP

Main Dimensions & Performance Data

d 320 mm Bore diameter
D 580 mm Outside diameter
B 92 mm Width
Cr 610,000 N Basic dynamic load rating, radial
C0r 1,190,000 N Basic static load rating, radial
Cur 29,000 N Fatigue load limit, radial
nG 1,660 1/min Limiting speed
nϑr 1,120 1/min Reference speed
≈m 92.5 kg Weight

Mounting dimensions

da min 340 mm Minimum diameter of shaft shoulder
Da max 560 mm Maximum diameter of housing shoulder
Db max 569 mm Maximum diameter of housing shoulder
ra max 4 mm Maximum fillet radius of shaft
ra1 max 2 mm Maximum fillet radius of housing

FAG 7264-B-MP Angular Contact Ball Bearing Overview

The 7264-B-MP is an FAG angular contact ball bearing in the 72..-B-MP series. Product information identifies it as a single-row bearing with a solid brass cage. Its listed main dimensions are a 320 mm bore, 580 mm outside diameter, and 92 mm width, with an approximate mass of 92.5 kg.

What are the basic model and dimension details?

The bearing is branded FAG and classified within angular contact ball bearings. The supplied dimensions are: bore diameter d = 320 mm, outside diameter D = 580 mm, and width B = 92 mm.

  • Model: 7264-B-MP
  • Series: Angular Contact Ball Bearings
  • Cage: Solid brass cage
  • Configuration: Single row

Published Load, Speed, and Temperature Data

The product data lists radial basic dynamic load rating Cr = 610,000 N, radial basic static load rating C0r = 1,190,000 N, and radial fatigue load limit Cur = 29,000 N. The limiting speed is 1,660 1/min, the reference speed is 1,120 1/min, and the stated operating temperature range is -30 °C to 200 °C.

What performance figures are provided?

The supplied figures should be used as published product data rather than as application-specific recommendations.

  1. Basic dynamic load rating, radial: 610,000 N
  2. Basic static load rating, radial: 1,190,000 N
  3. Fatigue load limit, radial: 29,000 N
  4. Limiting speed: 1,660 1/min
  5. Reference speed: 1,120 1/min

Mounting, Chamfer, and Geometry Information

Mounting dimensions list a minimum shaft shoulder diameter of 340 mm, maximum housing shoulder diameters of 560 mm and 569 mm, and maximum fillet radii of 4 mm for the shaft and 2 mm for the housing. Geometry data includes a 40° contact angle and specified shoulder and pressure-cone dimensions.

Which mounting and dimensional values are listed?

The supplied data includes the following installation-related measurements:

  • da min: 340 mm
  • Da max: 560 mm
  • Db max: 569 mm
  • ra max: 4 mm
  • ra1 max: 2 mm
  • rmin: 5 mm
  • r1 min: 2 mm
  • D1: 476.5 mm
  • d1: 425 mm
  • a: 234.8 mm
  • Contact angle: 40°

Similar to product

7264-B-MP