FAG 7334-B-MP-UA
Angular contact ball bearing 73..-B-MP, single row, solid brass cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
170 mm
Bore diameter
D
360 mm
Outside diameter
B
72 mm
Width
Cr
420,000 N
Basic dynamic load rating, radial
C0r
580,000 N
Basic static load rating, radial
Cur
18,600 N
Fatigue load limit, radial
nG
2,750 1/min
Limiting speed
nϑr
1,840 1/min
Reference speed
≈m
42 kg
Weight
Mounting dimensions
da min
187 mm
Minimum diameter of shaft shoulder
Da max
343 mm
Maximum diameter of housing shoulder
Db max
351 mm
Maximum diameter of housing shoulder
ra max
3 mm
Maximum fillet radius of shaft
ra1 max
1.5 mm
Maximum fillet radius of housing
FAG 7334-B-MP-UA Angular Contact Ball Bearing Basics
What are the identifying details of the 7334-B-MP-UA?
The 7334-B-MP-UA is an FAG single-row angular contact ball bearing in the 73..-B-MP design. The supplied description identifies it as having a solid brass cage.
- Brand: FAG
- Series: Angular Contact Ball Bearings
- Bore diameter: 170 mm
- Outside diameter: 360 mm
- Width: 72 mm
- Weight: approximately 42 kg
Performance, Contact Angle, and Temperature Data
What load, speed, and temperature values are supplied?
The bearing data lists the following radial load ratings and speed values:
- Basic dynamic load rating (Cr): 420,000 N
- Basic static load rating (C0r): 580,000 N
- Fatigue load limit (Cur): 18,600 N
- Limiting speed (nG): 2,750 1/min
- Reference speed: 1,840 1/min
- Contact angle: 40°
- Operating temperature range: -30 °C to 200 °C
Mounting and Dimensional Reference Information
What mounting and geometry dimensions should be reviewed?
For installation planning, the supplied mounting dimensions and related geometry values are:
- Shaft shoulder minimum diameter (da min): 187 mm
- Housing shoulder maximum diameter (Da max): 343 mm
- Housing shoulder maximum diameter (Db max): 351 mm
- Maximum shaft fillet radius (ra max): 3 mm
- Maximum housing fillet radius (ra1 max): 1.5 mm
- Minimum chamfer dimensions: r min 4 mm; r1 min 1.5 mm
- Outer ring shoulder diameter (D1): 290.85 mm
- Inner ring shoulder diameter (d1): 248.95 mm
- Distance between pressure-cone apexes (a): 148.2 mm
Verify all dimensions and operating conditions against the intended assembly requirements before selection or installation.
