FAG 7336-B-MP
Angular contact ball bearing 73..-B-MP, single row, solid brass cage
(BRAND)：FAG
(Availability)：In Stock
Main Dimensions & Performance Data
d
180 mm
Bore diameter
D
380 mm
Outside diameter
B
75 mm
Width
Cr
430,000 N
Basic dynamic load rating, radial
C0r
610,000 N
Basic static load rating, radial
Cur
19,000 N
Fatigue load limit, radial
nG
2,600 1/min
Limiting speed
nϑr
1,760 1/min
Reference speed
≈m
41.7 kg
Weight
Mounting dimensions
da min
197 mm
Minimum diameter of shaft shoulder
Da max
363 mm
Maximum diameter of housing shoulder
Db max
371 mm
Maximum diameter of housing shoulder
ra max
3 mm
Maximum fillet radius of shaft
ra1 max
1.5 mm
Maximum fillet radius of housing
FAG 7336-B-MP Angular Contact Ball Bearing Overview
What is the 7336-B-MP?
The FAG 7336-B-MP is a single-row angular contact ball bearing in the FAG 73..-B-MP series. The product data identifies a solid brass cage and a 40° contact angle.
- Brand: FAG
- Series: Angular Contact Ball Bearings
- Model: 7336-B-MP
- Bore diameter: 180 mm
- Outside diameter: 380 mm
- Width: 75 mm
7336-B-MP Dimensions and Performance Data
What dimensions and ratings are listed for this bearing?
The supplied data lists the following main dimensions, load ratings, speed values, and mass:
- Basic dynamic load rating, radial (Cr): 430,000 N
- Basic static load rating, radial (C0r): 610,000 N
- Fatigue load limit, radial (Cur): 19,000 N
- Limiting speed (nG): 2,600 1/min
- Reference speed (nϑr): 1,760 1/min
- Weight: 41.7 kg
Mounting, Geometry, and Temperature Details
What mounting and dimensional details should be reviewed?
The bearing data includes mounting dimensions, chamfer dimensions, shoulder geometry, pressure-cone spacing, and operating temperature limits. Review these values against the intended shaft and housing arrangement.
- Mounting dimensions: da min 197 mm; Da max 363 mm; Db max 371 mm; ra max 3 mm; ra1 max 1.5 mm.
- Geometry and chamfers: r min 4 mm; r1 min 1.5 mm; D1 303 mm; d1 259 mm; a 155 mm; contact angle 40°.
- Temperature range: Tmin -30 °C to Tmax 200 °C.
Use the listed dimensions and ratings as product data; suitability for a specific installation should be checked against the application requirements.
