SKF 29268
Spherical roller thrust bearing with machined metal cage
Dimensions
SKF 29268 Spherical Roller Thrust Bearing
What is the SKF 29268?
The SKF 29268 is part of the Spherical roller thrust bearings product series and is identified under the SKF roller bearing category path. The supplied product information describes it as a spherical roller thrust bearing with a machined metal cage.
- Brand: SKF
- Model: 29268
- Product series: Spherical roller thrust bearings
- Category: Brand > SKF > Bearings > Roller bearings > Spherical roller thrust bearings
29268 Dimensions and Mass
What dimensions are provided for the 29268?
The product data lists the following principal dimensions and related measurements for the SKF 29268. Dimensions should be checked against the intended arrangement before selection or installation.
- Bore diameter, d: 340.0 mm
- Outside diameter, D: 460.0 mm
- Height, H: 73.0 mm
- Outside diameter of shaft washer end side face, d1: 445.0 mm
- Shoulder diameter outer ring, D1: 395.0 mm
- Width shaft washer, B: 21.0 mm
- Height shaft washer plus cage, B1: 69.0 mm
- Height housing washer, C: 37.5 mm
- Distance from shaft washer end side face to pressure point, s: 183.0 mm
- Chamfer dimension, r1,2: 3.0 mm
- Mass: 34.0 kg
Published Load and Speed Values
What performance values are included in the supplied data?
The structured product data includes one load-related value and one rotational speed value. Because the data source does not label the load value as static or dynamic, it is presented only as the supplied load figure.
- Supplied load value: 1130.0 kN
- Speed value: 1300.0 r/min
Use these figures with the complete SKF 29268 engineering documentation when confirming suitability for a specific bearing arrangement.
