SKF PCM 101210 E
PTFE composite straight bushing
Dimensions
SKF PCM 101210 E PTFE Composite Straight Bushing
The PCM 101210 E is an SKF PTFE composite straight bushing within the bushings, thrust washers and strips product series. It is listed under the plain bearings category path for SKF products.
What type of bearing is the PCM 101210 E?
The supplied product data identifies it as a PTFE composite straight bushing. The data does not provide additional material, certification, application, or guarantee details.
PCM 101210 E Dimensions and Weight
- Bore diameter d: 10.0 mm
- Outside diameter D: 12.0 mm
- Width B: 10.0 mm
- Product net weight: 0.0025 kg
The supplied dimension data also lists chamfer values identified as c1 0.1 mm and c1 0.6 mm in the bore axial direction, and c2 0.2 mm and c2 1.0 mm in the outside-diameter axial direction.
What are the main size values for this bushing?
The main stated size values are a 10.0 mm bore, 12.0 mm outside diameter, and 10.0 mm width. Use these values when checking the bushing against a specific housing or shaft requirement.
PCM 101210 E Listed Product Data
The structured product data lists a value of 8.0 kN for the PCM 101210 E. Because the source field does not define this as a static, dynamic, or another load rating, it should be treated only as the supplied numerical value rather than interpreted as a rated performance claim.
- Model: PCM 101210 E
- Brand: SKF
- Series: Bushings, thrust washers and strips
- Designation: PTFE composite straight bushing
What product information is available from the supplied data?
The available factual details are the SKF brand, PCM 101210 E model, product series, PTFE composite straight bushing description, dimensions, weight, and the listed 8.0 kN value. Other details should be confirmed from official product documentation before selection or installation.
