SKF PSM 182218 A51
Sintered bronze straight bushing
Dimensions
SKF PSM 182218 A51 Sintered Bronze Straight Bushing
The SKF PSM 182218 A51 is a sintered bronze straight bushing within SKF's Bushings, thrust washers and strips product series. It is listed under the plain bearings category path for SKF products.
What type of bearing is the PSM 182218 A51?
The supplied product data identifies it as a sintered bronze straight bushing. No additional material grade, application, or performance claims are provided in the data.
Stated Dimensions and Product Data
- Bore diameter (d): 18.0 mm
- Outside diameter (D): 22.0 mm
- Width (B): 18.0 mm
- Mass: 0.014 kg, listed as product net weight
What are the measured dimensions of this bushing?
The product data lists an 18.0 mm bore, a 22.0 mm outside diameter, and an 18.0 mm width. These dimensions should be checked against the selected shaft and housing requirements before use.
Series and Category Information
The PSM 182218 A51 is associated with the SKF brand and the Bushings, thrust washers and strips product series. Its category path is Brand > SKF > Bearings > Plain bearings > Bushings, thrust washers and strips.
How should the product family be understood?
Based only on the supplied data, the bushing belongs to SKF's plain bearing offering, specifically within the bushings, thrust washers, and strips series. Compatibility and suitability should be verified using the stated dimensions and relevant engineering requirements.
