SKF HJ 328 EC
Angle ring (L-shaped thrust collar) for single row cylindrical roller bearings, NU or NJ design
Dimensions
SKF HJ 328 EC Angle Ring for Cylindrical Roller Bearings
The SKF HJ 328 EC belongs to the Angle rings (L-shaped thrust collars) product series. It is described as an angle ring, or L-shaped thrust collar, for single row cylindrical roller bearings in NU or NJ design.
What is the HJ 328 EC?
The HJ 328 EC is an SKF-branded L-shaped thrust collar classified within angle rings for cylindrical roller bearings. It is intended for use where the bearing design calls for this type of thrust collar.
Stated Dimensions and Product Mass
- Model: HJ 328 EC
- Brand: SKF
- Series: Angle rings (L-shaped thrust collars)
- Bore diameter d: 140.0 mm
- Outside diameter d1: 195.6 mm
- Width B1: 15.0 mm
- Width contacting inner ring side face B2: 25.0 mm
- Chamfer length r3,4, radial direction: 4.0 mm
- Product net weight: 2.04 kg
What dimensions are provided for this collar?
The supplied data lists d 140.0 mm, d1 195.6 mm, B1 15.0 mm, B2 25.0 mm, and r3,4 4.0 mm. The stated product net weight is 2.04 kg.
Product Identification and Category Information
The HJ 328 EC is categorized under Brand > SKF > Bearings > Roller bearings > Angle rings (L-shaped thrust collars). Its product title identifies it as an angle ring for single row cylindrical roller bearings, NU or NJ design.
How should the HJ 328 EC be identified?
Identify the part by the model HJ 328 EC, brand SKF, series Angle rings (L-shaped thrust collars), and the dimensions listed in the product data. Compatibility should be confirmed against the relevant bearing or equipment specification.
