SKF NKXR 50 Z
Combined needle roller / cylindrical roller thrust bearing with a cover
(BRAND)：SKF
(Availability)：In Stock
Dimensions
Fw
50.0 mm
Diameter under rollers
D
62.0 mm
Outside diameter
C
35.0 mm
Width
C1
14.0 mm
Width of thrust part
C1
10.0 mm
Distance side face to lubrication hole
d
50.0 mm
Bore diameter of thrust part
D2
71.5 mm
Diameter of stamped steel cover
r1,2
0.6 mm
Chamfer dimension
mass
0.286 kg
Product net weight
NKXR 50 Z Combined Needle Roller Bearing Introduction
What is the NKXR 50 Z?
The NKXR 50 Z is an SKF combined needle roller / cylindrical roller thrust bearing with a cover. It is listed in the Combined needle roller product series within the SKF combined bearings category.
Supplied Dimensions and Product Data
What dimensions are provided for the NKXR 50 Z?
- Fw: 50.0 mm
- Diameter under rollers D: 62.0 mm
- Outside diameter C: 35.0 mm
- Width C1: 14.0 mm
- Width of thrust part C1: 10.0 mm
- Distance side face to lubrication hole d: 50.0 mm
- Bore diameter of thrust part D2: 71.5 mm
- Diameter of stamped steel cover: supplied data does not provide a separate value
- Chamfer dimension r1,2: 0.6 mm
- Product net weight: 0.286 kg
Operating Data and Selection Notes
What speed information is available for this bearing?
The supplied product data lists 4300.0 r/min. Use this value only as the speed figure associated with the provided product record. Compatibility with a specific application should be checked against the full installation and operating requirements before selection.
