IKO LRT101412
Inner Ring, Metric, General Usage, High Carbon Steel, To Assemble with RNAF142612
(BRAND)：IKO
(Availability)：In Stock
Order Number
LRT101412
Shaft Dimaeter
10
mm
Inside Diamater
10
mm
Outer Diameter
14
mm
Width
12
mm
rs min.
0.30
mm
da min
12.0
mm
da max
13.0
mm
Assembled bearings
RNAF 142612
Assembled bearings
-
Assembled bearings
-
Assembled bearings
-
Mass
7.0
g
The IKO LRT101412 Is a Metric Inner Ring
What basic product information is available for the LRT101412?
The LRT101412 is an IKO inner ring in the Inner Rings product series. It is listed under Brand > IKO > Inner Rings and is identified for metric, general usage. The stated assembly reference is RNAF 142612.
- Brand: IKO
- Model: LRT101412
- Bearing type: Inner Rings
- Design basis: Metric
The LRT101412 Has Recorded 10 mm, 14 mm, and 12 mm Dimensions
What dimensions and related values are provided?
The supplied product data lists the inner ring dimensions and edge-related values below. These values should be checked against the intended assembly before selection.
- Shaft diameter: 10 mm
- Inside diameter: 10 mm
- Outer diameter: 14 mm
- Width: 12 mm
- rs minimum: 0.30 mm
- da minimum: 12.0 mm
- da maximum: 13.0 mm
The Inner Ring Material Is Listed as High Carbon Chrome Steel
What material, assembly, and mass details are supplied?
The product data identifies the LRT101412 material as high carbon chrome steel, also described in the detailed introduction as high carbon steel. The inner ring is specified to assemble with RNAF 142612 and has a listed mass of 7.0 g.
- Confirm the 10 mm inside diameter and 14 mm outside diameter for the intended shaft and housing arrangement.
- Review the 12 mm width and 0.30 mm minimum rs value against the assembly geometry.
- Use the RNAF 142612 reference when matching this inner ring to the stated assembled bearing.
