NTN UCS209LD1NR Set Screw Type Insert Bearing
What does the product identification include?
The UCS209LD1NR is an NTN ball bearing in the Set Screw Type Bearings - Cylindrical O.D. product series. It is listed under the insert bearing set screw type category and uses a round bore configuration.
- Model: UCS209LD1NR
- Brand: NTN
- Bearing type: Ball bearing / insert bearing
- Series: Set Screw Type Bearings - Cylindrical O.D.
- Bore type: Round
Technical Construction and Performance Specifications
What technical features and ratings are specified?
The bearing uses through-hardened steel construction with steel balls and nitrile rubber contact seals. It is double sealed, has ISO Class 0 precision, CN radial internal clearance, outer-ring lubrication, and a standard-duty performance classification.
- Dynamic load rating: 32500 N
- Static load rating: 20400 N
- Grease limiting speed: 3450 RPM
- Locking device: Two set screws at 120 degrees
- Seal type: Contact seal; double sealed enclosure
- Operating temperature range: -40 to 120 ºC
- Weight: 3.400 kg
Dimensional Details for the UCS209LD1NR Bearing
What dimensions are provided for selection and fitting?
The supplied dimensional data lists the principal bearing envelope and related geometry. Confirm mating shaft, housing, and accessory requirements against these dimensions before installation.
- Bore diameter d: 45.000 mm
- Outside diameter D: 85.000 mm
- Width C: 22.000 mm
- Inner-ring width B: 49.200 mm
- Chamfer dimensions r and r1: 1.500 mm each
- Set screw thread ds: M8x1
- Additional dimensions: G 8.000 mm, d4 57.5 mm, S1 30.2 mm, S 19 mm, a 3.5 mm, f 2.460 mm, D1 81.810 mm, and D2 91.600 mm