UCS321D1
MORE +
CLOSE +
(BRAND): NTN
(Availability):In Stock

Detailed data of UCS321D1 Set Screw Type Bearings - Cylindrical O.D.

Technical Specifications

Type Insert Bearing
Bore Type Round
Bearing Type Ball Bearing
Material Through Hardened Steel
Ball Material Steel
Limiting Speed - Grease 1400 RPM
Seal Type Contact
Seal Material Nitrile Rubber
Performance Heavy Duty
Locking Device 2 -120° Set Screw
Lubrication Re-Lubricatable
Radial Internal Clearance CN
Static Load Rating 153000 N
Dynamic Load Rating 184000 N
Enclosure Double Sealed
Weight 12.600 kg
Operating Temperature Range -40 to 120 ºC

Dimensional Specifications

d 105.000 mm
D 225.000 mm
C 57.000 mm
B 112.000 mm
r 3.000 mm
ds M18x1.5
G 18 mm
d4 142.100 mm
S1 69.000 mm
S 44 mm

NTN UCS321D1 Set Screw Type Insert Bearing

The NTN UCS321D1 belongs to the Set Screw Type Bearings - Cylindrical O.D. series and is classified as an insert ball bearing. It uses a round bore and two set screws arranged at 120 degrees for shaft locking.

What is the basic configuration of this bearing?

The UCS321D1 is a ball bearing with through-hardened steel bearing material and steel balls. It includes a contact seal, double-sealed enclosure, nitrile rubber seal material, and a re-lubricatable design. The listed radial internal clearance is CN.

UCS321D1 Dimensions and Weight Specifications

The dimensional data for the NTN UCS321D1 includes the following measured values:

  • Bore diameter (d): 105.000 mm
  • Outside diameter (D): 225.000 mm
  • Width C: 57.000 mm
  • Dimension B: 112.000 mm
  • Chamfer dimension (r): 3.000 mm
  • Set screw thread (ds): M18x1.5
  • Dimension G: 18 mm
  • Dimension d4: 142.100 mm
  • Dimension S1: 69.000 mm
  • Dimension S: 44 mm
  • Weight: 12.600 kg

What bore and outside diameter apply to this unit?

This bearing has a 105.000 mm bore and a 225.000 mm outside diameter. Additional dimensional values should be checked against the listed specification table before installation.

UCS321D1 Load, Speed, and Operating Data

The supplied performance data identifies the UCS321D1 as a heavy-duty insert bearing with defined load ratings, speed, and temperature information:

  1. Dynamic load rating: 184000 N
  2. Static load rating: 153000 N
  3. Limiting speed with grease: 1400 RPM
  4. Operating temperature range: -40 to 120 ºC
  5. Locking device: 2-120° set screws
  6. Lubrication: Re-lubricatable

What performance and sealing details are provided?

The UCS321D1 has a grease limiting speed of 1400 RPM, a dynamic load rating of 184000 N, and a static load rating of 153000 N. Its double-sealed arrangement uses nitrile rubber contact seals, and the stated operating temperature range is -40 to 120 ºC.

Similar to product NTN UCS321D1 Set Screw Type Bearings - Cylindrical O.D.