The NTN UCS324D1 belongs to the Set Screw Type Bearings - Cylindrical O.D. series. It is configured as a round-bore ball bearing with a through-hardened steel bearing material, steel balls, and a 2-set-screw locking device positioned at 120 degrees.
The UCS324D1 uses two set screws for shaft locking and is supplied as a double-sealed bearing. Its contact seals use nitrile rubber, and the bearing is listed as re-lubricatable.
Product data identifies the UCS324D1 as a heavy-duty ball bearing with CN radial internal clearance. The published static load rating is 185000 N, and the published dynamic load rating is 207000 N. Its stated operating temperature range is -40 to 120 °C.
The supplied data lists a static load rating of 185000 N, a dynamic load rating of 207000 N, and an operating temperature range of -40 to 120 °C. These values should be used according to the published product specification.
The bearing dimensions supplied for the NTN UCS324D1 are: bore d = 120.000 mm, outside diameter D = 260.000 mm, width C = 63.000 mm, inner-ring width B = 126.000 mm, and chamfer r = 3.000 mm. Additional data includes ds M18x1.5, G 18 mm, d4 165.2 mm, S1 75 mm, S 51 mm, and weight 19.000 kg.
Verify the listed 120.000 mm bore, 260.000 mm outside diameter, 63.000 mm width, 126.000 mm inner-ring width, and related dimensional values against the housing and shaft requirements. The supplied materials are through-hardened steel for the bearing, steel for the balls, and nitrile rubber for the contact seals.