SKF 29412 E

Spherical roller thrust bearings

Spherical roller thrust bearing with stamped steel cage

(BRAND)：SKF

(Availability)：In Stock

(EMAIL)：info@noksbearings.com

Detailed data of

29412 E

Spherical roller thrust bearings

Dimensions

d 60.0 mm Bore diameter

D 130.0 mm Outside diameter

H 42.0 mm Height

d₁ 112.0 mm Outside diameter of shaft washer end side face

D₁ 85.5 mm Shoulder diameter outer ring

B 27.0 mm Width shaft washer or length of shaft washer bore diameter that fits on shaft (bearings with a stamped steel cage)

B₁ 36.7 mm Height shaft washer + cage

C 21.0 mm Height housing washer

s 38.0 mm Distance from shaft washer end side face to pressure point

r_1,2 1.5 mm Chamfer dimension shaft washer

mass 2.57 kg Product net weight

29412 E SKF Spherical Roller Thrust Bearing Introduction

The 29412 E is an SKF spherical roller thrust bearing supplied with a stamped steel cage. It is listed within the SKF spherical roller thrust bearings product series.

What basic product information is provided for the 29412 E bearing?

Model: 29412 E
Brand: SKF
Series: Spherical roller thrust bearings
Cage: Stamped steel cage
Category: Brand > SKF > Bearings > Roller bearings > Spherical roller thrust bearings

29412 E Dimensions and Physical Specifications

The supplied dimensional data identifies the bearing size and related component dimensions. Confirm compatibility against the mating shaft and housing requirements before selection.

What dimensions are recorded for the 29412 E?

Bore diameter d: 60.0 mm
Outside diameter D: 130.0 mm
Height H: 42.0 mm
Outside diameter of shaft washer end side face d1: 112.0 mm
Shoulder diameter outer ring D1: 85.5 mm
Width shaft washer B: 27.0 mm
Height shaft washer plus cage B1: 36.7 mm
Height housing washer C: 21.0 mm
Distance from shaft washer end side face to pressure point s: 38.0 mm
Chamfer dimension r1,2: 1.5 mm
Mass: 2.57 kg

29412 E Supplied Performance Values

The product data includes a load value and a rotational speed value. These values are presented as supplied and should be checked against the complete engineering documentation for the intended use.