SKF DTW-3500-J2G
Polyurethane snap-in wiper seal with a single lip, two additional static lips and notches on the inside edge
(BRAND)：SKF
(Availability)：In Stock
Dimensions
d
88.9 mm
Rod diameter
D
101.52 mm
Housing groove diameter
D2
97.21 mm
Housing shoulder diameter
L
6.32 mm
Housing groove width
S
6.31 mm
Radial depth
C
6.35 mm
Lead-in chamfer length on rod
R
0.64 mm
Groove radius
mass
0.0156 kg
Product net weight
SKF DTW-3500-J2G Wiper Seal for Hydraulic Systems
What is the DTW-3500-J2G?
The SKF DTW-3500-J2G is part of the SKF Wiper seals product series within the hydraulic seals category. It is a polyurethane snap-in wiper seal with a single lip, two additional static lips, and notches on the inside edge.
- Brand: SKF
- Series: Wiper seals
- Model: DTW-3500-J2G
- Material: Polyurethane (TPU U-1003)
Defined Dimensions for the DTW-3500-J2G Seal
What dimensions are provided for this wiper seal?
The supplied product data lists the following measurements for identification and installation planning:
- Rod diameter d: 88.9 mm
- Diameter D: 101.52 mm
- Housing groove diameter D2: 97.21 mm
- Housing shoulder diameter L: 6.32 mm
- Housing groove width S: 6.31 mm
- Radial depth C: 6.35 mm
- Lead-in chamfer length on rod R: 0.64 mm
- Groove radius: 0.0156 kg
- Product net weight: 0.0156 kg
Polyurethane Snap-In Construction Details
What construction features are specified?
The DTW-3500-J2G uses a snap-in design and is made from Polyurethane (TPU U-1003). Its stated profile includes one wiping lip, two additional static lips, and notches along the inside edge. These details describe the supplied seal configuration without implying additional performance claims.
- Confirm the listed model and material against the installation requirement.
- Compare the provided rod, diameter, groove, width, and chamfer dimensions with the housing specification.
- Use the supplied profile description to verify the intended wiper-seal configuration.
