MLCH7008CVDUJ74S
MORE +
CLOSE +
(BRAND): NTN
(Availability):In Stock

Detailed data of MLCH7008CVDUJ74S Duplex Machline Angular Contact Ball Bearings

Technical Specifications

Type Angular Contact Ball Bearing
Bore Type Round
Material High Carbon Chrome Steel
Cage Type Stratified
Cage Material Phenolic
Ball Material Ceramic
Precision ISO Class 4
Configuration Two
Preload Light
Enclosure Open
Operating Temperature Range -40 to 120 ºC

Dimensional Specifications

d 40.000 mm
D 68.000 mm
B 15.000 mm
2B 30.000 mm
r2 max 1.000 mm
r3 max 0.300 mm
Contact Angle 17 º
d2 49.200 mm
d3 47.500 mm
D1 57.500 mm
D4 59.600 mm
D5 50.500 mm
E 3.000 mm

NTN MLCH7008CVDUJ74S Duplex Machline Bearing Introduction

The MLCH7008CVDUJ74S is an NTN duplex Machline angular contact ball bearing in the precision angular contact ball bearing range. It uses a round bore, open configuration, 17-degree contact angle, and a two-bearing arrangement with light preload.

What bearing type and series does this model belong to?

This model is part of the NTN Duplex Machline Angular Contact Ball Bearings series and is categorized as a precision angular contact ball bearing.

MLCH7008CVDUJ74S Materials and Construction Details

The bearing construction is specified with high carbon chrome steel for the bearing material, ceramic balls, and a stratified phenolic cage. Its precision classification is ISO Class 4.

  • Bearing material: High carbon chrome steel
  • Ball material: Ceramic
  • Cage: Stratified phenolic cage
  • Enclosure: Open
  • Operating temperature range: -40 to 120 ºC

What preload and configuration are specified for this bearing?

The supplied data identifies a two configuration with light preload, suited for describing this duplex set without adding unsupported application claims.

MLCH7008CVDUJ74S Dimensional Specifications

The dimensional data lists the primary bearing boundary dimensions and related geometry. Verify all measurements against the installation requirements before selection.

  1. Bore diameter (d): 40.000 mm
  2. Outside diameter (D): 68.000 mm
  3. Width (B): 15.000 mm
  4. Duplex width (2B): 30.000 mm
  5. r2 max: 1.000 mm
  6. r3 max: 0.300 mm
  7. Contact angle: 17 degrees

What additional dimensional values are provided for this NTN bearing?

The product data also lists d2 as 49.200 mm, d3 as 47.500 mm, D1 as 57.500 mm, D4 as 59.600 mm, D5 as 50.500 mm, and E as 3.000 mm.

Similar to product NTN MLCH7008CVDUJ74S Duplex Machline Angular Contact Ball Bearings