MLE71901HVDUJ74S
MORE +
CLOSE +
(BRAND): NTN
(Availability):In Stock

Detailed data of MLE71901HVDUJ74S Duplex Machline Angular Contact Ball Bearings

Technical Specifications

Type Angular Contact Ball Bearing
Bore Type Round
Material High Carbon Chrome Steel
Cage Type Stratified
Cage Material Phenolic
Ball Material Steel
Seal Type Non-Contact
Seal Material Nitrile Rubber
Precision ISO Class 4
Enclosure Double Sealed
Operating Temperature Range -40 to 120 ºC

Dimensional Specifications

d 12.000 mm
D 24.000 mm
B 6.000 mm
2B 12.000 mm
r2 max 0.300 mm
r3 max 0.100 mm
Contact Angle 25 º
d2 15.100 mm
d3 15.400 mm
D1 19.000 mm
D4 19.600 mm

NTN MLE71901HVDUJ74S Duplex Machline Angular Contact Ball Bearing

What is the MLE71901HVDUJ74S?

The NTN MLE71901HVDUJ74S belongs to the Duplex Machline Angular Contact Ball Bearings series and is listed within NTN precision angular contact ball bearings. It is an angular contact ball bearing with a round bore, steel balls, a stratified phenolic cage, and double non-contact nitrile rubber seals.

  • Brand: NTN
  • Series: Duplex Machline Angular Contact Ball Bearings
  • Bearing type: Angular contact ball bearing
  • Precision class: ISO Class 4
  • Enclosure: Double sealed

Defined Dimensional Specifications for the MLE71901HVDUJ74S

What dimensions are provided for this bearing?

The supplied dimensional data identifies the principal boundary dimensions and related geometry. Confirm installation dimensions against the mating equipment before selection.

  • Bore diameter (d): 12.000 mm
  • Outside diameter (D): 24.000 mm
  • Single width (B): 6.000 mm
  • Duplex width (2B): 12.000 mm
  • Contact angle: 25°
  • r2 max: 0.300 mm
  • r3 max: 0.100 mm
  • d2: 15.100 mm
  • d3: 15.400 mm
  • D1: 19.000 mm
  • D4: 19.600 mm

Material, Seal, and Temperature Details

What construction and operating information is specified?

The product data lists high carbon chrome steel as the bearing material, steel as the ball material, and phenolic as the stratified cage material. The non-contact seals use nitrile rubber, and the stated operating temperature range is -40 to 120 ºC.

  1. Verify that the 12.000 mm bore, 24.000 mm outside diameter, and 12.000 mm duplex width match the shaft and housing arrangement.
  2. Review the double-sealed, non-contact configuration against the intended installation.
  3. Use the stated ISO Class 4 precision, 25° contact angle, and temperature range as part of the engineering check.

Similar to product NTN MLE71901HVDUJ74S Duplex Machline Angular Contact Ball Bearings