IKO CR10V

IKO CR10V Standard Inch Series Cam Follower

The IKO CR10V is part of the IKO Cam Followers product series and is listed under Brand > IKO > Cam Followers. The supplied data identifies it as a standard inch series cam follower with a cylindrical outer ring, shielded arrangement, screw driver slot, and full complement internal structure.

What bearing type and material are specified for the CR10V?

The CR10V is categorized as a Cam Follower. The bearing material is listed as High Carbon Steel, and the internal structure is specified as Full Complement.

• Model: CR10V
• Brand: IKO
• Product series: Cam Followers
• Outer ring style: Cylindrical outer ring
• Configuration: Shielded with screw driver slot

CR10V Dimension and Thread Details

The product data provides inch-series dimensions in metric values. The CR10V has a 6.350 mm stud diameter, a 15.875 mm outer diameter, and a 10.319 mm width. The specified thread is 1/4-28.

What principal measurements are supplied?

The recorded measurements include the following:

• Stud diameter: 6.350 mm
• Outer diameter: 15.875 mm
• Width: 10.319 mm
• Maximum width: 11.8 mm
• Length: 15.875 mm; a separate length value of 7.938 mm is also listed
• Thread: 1/4-28
• Dimension: 0.794 mm
• Diameter: 3.175 mm
• rs minimum: 0.397 mm
• Minimum installation-related dimension: 11.509 mm

CR10V Load Rating, Torque, and Mass Information

The supplied product data includes load ratings, tightening torque, and mass for the CR10V. These values are presented as published specification data and should be used with the complete product documentation for selection and installation.

What performance-related figures are recorded?

The CR10V data lists a basic dynamic load rating of 5830 N, a basic static load rating of 7660 N, a maximum tightening torque of 3.4 Nm, and a mass of 19 g.

1. Basic dynamic load rating: 5830 N
2. Basic static load rating: 7660 N
3. Maximum tightening torque: 3.4 Nm
4. Mass: 19 g