IKO CR12
Standard Inch Series Cam Follower, Caged, High Carbon Steel, Cylindrical Outer Ring, Shielded, Screw Driver Slot,
IKO CR12 Cam Follower Overview
The IKO CR12 is part of the IKO Cam Followers product series and uses a standard inch series design. The supplied data identifies it as a caged cam follower with a cylindrical outer ring, shielded construction, screw driver slot, and high carbon steel bearing material.
What type of bearing is the CR12?
The CR12 is classified as a Cam Follower. Its listed internal structure is Cage Type, and its bearing material is listed as High Carbon Steel.
CR12 Dimensions and Specifications
The IKO CR12 includes the following dimensions and product specifications from the supplied data:
- Stud diameter: 9.525 mm
- Outer diameter: 19.050 mm
- Width: 12.700 mm
- Thread: 3/8-24
- Maximum width: 14.2 mm
- Length: 22.225 mm
- Additional listed dimensions: 9.525 mm, 6.35 mm, 0.794 mm, 4.762 mm, 2.381 mm, and 0.794 mm rs min.
- Installation-related minimum dimension: 13.494 mm
- Maximum tightening torque: 10.8 Nm
- Mass: 35 g
What load ratings are provided for the CR12?
The supplied product data lists a basic dynamic load rating of 4420 N and a basic static load rating of 5110 N. No additional load, speed, or certification data is provided.
CR12 Product Identification and Configuration
The CR12 is ordered under order number CR12 and is categorized under Brand > IKO > Cam Followers. The available description identifies a standard inch series, caged, shielded cam follower with a screw driver slot and cylindrical outer ring.
What construction details are included in the supplied data?
The supplied data identifies the following construction details:
- Series: Standard Inch Series Cam Follower
- Internal structure: Cage Type
- Outer ring: Cylindrical Outer Ring
- Protection: Shielded
- Drive feature: Screw Driver Slot
- Bearing material: High Carbon Steel
