IKO CR14B
Standard Inch Series Cam Follower, Caged, High Carbon Steel, Cylindrical Outer Ring, Shielded, Hex Head,
IKO CR14B Cam Follower Overview
The IKO CR14B is part of the Cam Followers product series and is listed under the standard inch series. The supplied data identifies it as a caged, shielded cam follower with a cylindrical outer ring, hex head, and high carbon steel construction.
What type of bearing is the CR14B?
The CR14B is classified as a cam follower. Its recorded internal structure is cage type, and the bearing material is listed as high carbon steel.
CR14B Dimensions and Installation Data
The product data lists the following measurable details for the CR14B:
- Stud diameter: 9.525 mm
- Outer diameter: 22.225 mm
- Width: 12.700 mm
- Thread: 3/8-24
- Length: 22.225 mm
- Maximum width: 14.2 mm
- Minimum installation-related dimension: 15.081 mm
- Maximum tightening torque: 10.8 Nm
What additional dimensional values are provided?
The supplied data also includes dimensions of 9.525 mm, 6.35 mm, 0.794 mm, 4.762 mm, 2.381 mm, and 4.762 mm, along with a minimum fillet dimension, rs min., of 0.794 mm. These values should be checked against the provided product drawing or specification table before selection.
CR14B Load Ratings and Product Identification
The order number for this cam follower is CR14B. The recorded basic dynamic load rating is 4790 N, the basic static load rating is 5810 N, and the listed mass is 46 g.
What key specifications should be reviewed when identifying this bearing?
When identifying or comparing the CR14B, review the model, brand, series, dimensions, thread size, cage structure, material, outer-ring form, shielding configuration, head type, load ratings, torque value, and mass using only the supplied product information:
- Brand and series: IKO, Cam Followers
- Construction features: caged, shielded, cylindrical outer ring, hex head
- Material: high carbon steel
- Load ratings: 4790 N dynamic and 5810 N static
- Mass: 46 g
