IKO CR101
Standard Inch Series Cam Follower, Caged, High Carbon Steel, Cylindrical Outer Ring, Shielded, Screw Driver Slot,
(BRAND)：IKO
(Availability)：In Stock
Order Number
CR10-1
Stud Diameter
6.350
mm
Outer Diameter
15.875
mm
Width
11.112
mm
Stud Diameter
6.350
mm
Thread
1/4-28
Length
7.938
mm
Maximum width
12.5
mm
Length
19.050
mm
Dimension
-
mm
Dimension
0.794
mm
Diameter
3.175
mm
Diameter
-
mm
rs min.
0.397
mm
Min.Dimension related to the installation
11.509
mm
Maximum tightening torque
3.4
Nm
Basic dynamic load rating
3650
N
Basic static load rating
3670
N
Mass
21
g
IKO CR101 Cam Follower Overview
What type of bearing is the IKO CR101?
The IKO CR101 is listed under Cam Followers in the standard inch series. It is associated with the IKO brand and is described as a caged unit with a cylindrical outer ring, shielding, and a screwdriver slot.
- Order Number: CR10-1
- Series: Standard Inch Series Cam Followers
- Internal Structure: Cage Type
- Outer Ring: Cylindrical
- Configuration: Shielded, with screwdriver slot
CR101 Material and Dimensional Details
What material and dimensions are specified for the CR101?
The listed bearing material is high carbon steel. The supplied data identifies the following dimensions:
- Stud Diameter: 6.350 mm
- Outer Diameter: 15.875 mm
- Width: 11.112 mm
- Thread: 1/4-28
- Thread Length: 7.938 mm
- Maximum Width: 12.5 mm
- Length: 19.050 mm
- Dimension: 0.794 mm
- Diameter: 3.175 mm
- rs min.: 0.397 mm
- Installation-Related Minimum Dimension: 11.509 mm
- Mass: 21 g
CR101 Load Rating and Tightening Data
What performance values are provided in the product data?
The supplied specifications list a maximum tightening torque of 3.4 Nm. The basic load ratings are:
- Basic Dynamic Load Rating: 3650 N
- Basic Static Load Rating: 3670 N
Use these listed values as product reference data; suitability for a particular installation should be checked against the equipment requirements.
