IKO CR101VBS
Inch Series Cam Followers, Full complement, High Carbon Steel, Cylindrical, Sealed with integrated thrust washer, Hex Head
IKO CR101VBS Cam Follower Product Overview
The IKO CR101VBS is part of the Cam Followers product series. The supplied data identifies it as an inch-series, full-complement, cylindrical cam follower made of high carbon steel, sealed with an integrated thrust washer and featuring a hex head.
What bearing type and structure are specified for the CR101VBS?
The listed bearing type is Cam Followers, and its internal structure is listed as Full complement. The bearing material is listed as High Carbon Steel.
CR101VBS Dimensions and Stud Details
The product data provides the following dimensions and related measurements:
- Order number: CR10-1VBS
- Stud diameter: 6.350 mm
- Outer diameter: 15.875 mm
- Width: 11.112 mm
- Thread: 1/4-28
- Thread length: 7.938 mm
- Maximum width: 12.5 mm
- Length: 19.050 mm
- Minimum installation-related dimension: 11.509 mm
- rs minimum: 0.397 mm
What dimensions are shown as additional values?
The supplied data also lists dimensions of 0.794 mm and 3.175 mm. Some dimensional labels are not provided, so these values should be verified against the original manufacturer dimension table before selection.
CR101VBS Load, Torque, and Mass Information
The data sheet lists a maximum tightening torque of 3.4 Nm, a basic dynamic load rating of 5830 N, a basic static load rating of 7660 N, and a mass of 21 g.
What configuration details are included for this cam follower?
The CR101VBS is described as sealed with an integrated thrust washer and having a hex head. Its construction is cylindrical, and it belongs to the IKO Cam Followers category path: Brand > IKO > Cam Followers.
