IKO CR101VUU
Standard Inch Series Cam Follower, Full Complement, High Carbon Steel, Cylindrical Outer Ring, Sealed, Screw Driver Slot,
(BRAND)：IKO
(Availability)：In Stock
Order Number
CR10-1VUU
Stud Diameter
6.350
mm
Outer Diameter
15.875
mm
Width
11.112
mm
Stud Diameter
6.350
mm
Thread
1/4-28
Length
7.938
mm
Maximum width
12.5
mm
Length
19.050
mm
Dimension
-
mm
Dimension
0.794
mm
Diameter
3.175
mm
Diameter
-
mm
rs min.
0.397
mm
Min.Dimension related to the installation
11.509
mm
Maximum tightening torque
3.4
Nm
Basic dynamic load rating
6340
N
Basic static load rating
8530
N
Mass
21
g
IKO CR101VUU Standard Inch Series Cam Follower
What is the CR101VUU?
The IKO CR101VUU is a cam follower in the Cam Followers product series. The supplied data identifies it as a standard inch series unit with a cylindrical outer ring, sealed construction, screw driver slot, full-complement internal structure, and high carbon steel bearing material.
- Brand: IKO
- Series: Cam Followers
- Bearing type: Cam follower
- Internal structure: Full complement
- Material: High carbon steel
CR101VUU Dimensions and Installation Data
What dimensions are provided for this cam follower?
The product data lists the following measurements for the CR101VUU:
- Stud diameter: 6.350 mm
- Outer diameter: 15.875 mm
- Width: 11.112 mm
- Thread: 1/4-28
- Thread length: 7.938 mm
- Maximum width: 12.5 mm
- Length: 19.050 mm
- Dimension: 0.794 mm
- Diameter: 3.175 mm
- rs minimum: 0.397 mm
- Installation-related minimum dimension: 11.509 mm
- Maximum tightening torque: 3.4 Nm
CR101VUU Load Rating and Mass
What load and mass information is supplied?
The supplied product data provides the basic load ratings and mass for the IKO CR101VUU. These values can be compared with the requirements of the intended arrangement before selection or installation.
- Basic dynamic load rating: 6340 N
- Basic static load rating: 8530 N
- Mass: 21 g
The order number shown in the supplied data is CR10-1VUU, while the model is identified as CR101VUU.
