IKO CR10VR
Standard Inch Series Cam Follower, Full Complement, High Carbon Steel, Crowned Outer Ring, Shielded, Screw Driver Slot,
IKO CR10VR Cam Follower Overview
The CR10VR is an IKO cam follower in the Standard Inch Series. The supplied data identifies it as a full complement bearing made from high carbon steel, with a crowned outer ring, shielding, and a screwdriver slot.
What type of bearing is the CR10VR?
The CR10VR is classified under IKO Cam Followers and is listed as a Standard Inch Series cam follower. Its internal structure is specified as full complement.
CR10VR Dimensions and Construction Details
- Stud diameter: 6.350 mm
- Outer diameter: 15.875 mm
- Width: 10.319 mm
- Thread: 1/4-28
- Length: 15.875 mm
- Maximum width: 11.8 mm
- Mass: 19 g
What material and design features are specified?
The product data lists high carbon steel as the bearing material. Design features include a crowned outer ring, shielded configuration, and screwdriver slot.
CR10VR Load and Installation Data
The supplied specification includes a basic dynamic load rating of 5830 N and a basic static load rating of 7660 N. Installation-related values include a maximum tightening torque of 3.4 Nm and a minimum installation-related dimension of 11.509 mm.
What additional measurements are provided for selection?
The data also lists a 7.938 mm length, 0.794 mm dimension, 3.175 mm diameter, and additional dimension fields in millimeters. These values should be checked against the required mounting arrangement before selection.
