IKO CR14
Standard Inch Series Cam Follower, Caged, High Carbon Steel, Cylindrical Outer Ring, Shielded, Screw Driver Slot,
(BRAND)：IKO
(Availability)：In Stock
Order Number
CR14
Stud Diameter
9.525
mm
Outer Diameter
22.225
mm
Width
12.700
mm
Stud Diameter
9.525
mm
Thread
3/8-24
Length
9.525
mm
Maximum width
14.2
mm
Length
22.225
mm
Dimension
6.35
mm
Dimension
0.794
mm
Diameter
4.762
mm
Diameter
2.381
mm
rs min.
0.794
mm
Min.Dimension related to the installation
15.081
mm
Maximum tightening torque
10.8
Nm
Basic dynamic load rating
4790
N
Basic static load rating
5810
N
Mass
46
g
IKO CR14 Is a Standard Inch Series Cam Follower
What identifies the IKO CR14 cam follower?
The CR14 is an IKO cam follower in the Standard Inch Series. The supplied product data identifies it as a caged, shielded cam follower with a cylindrical outer ring, high carbon steel construction, and a screw driver slot.
- Brand: IKO
- Series: Cam Followers
- Bearing type: Cam Followers
- Internal structure: Cage Type
- Material: High Carbon Steel
The CR14 Provides Supplied Dimensional and Thread Details
What dimensions are listed for the CR14?
The product data lists the following measurements for selection and installation review:
- Outer diameter: 22.225 mm
- Width: 12.700 mm
- Stud diameter: 9.525 mm
- Thread: 3/8-24
- Maximum width: 14.2 mm
- Overall length: 22.225 mm
- Additional listed dimensions: 9.525 mm, 6.35 mm, 4.762 mm, 2.381 mm, and 0.794 mm
- Minimum installation-related dimension: 15.081 mm
- rs minimum: 0.794 mm
The CR14 Includes Rated Performance and Mass Data
What load, torque, and mass values are provided?
The supplied data specifies the maximum tightening torque, basic load ratings, and mass for the CR14. These values can be compared with the requirements of the intended arrangement before installation.
- Maximum tightening torque: 10.8 Nm
- Basic dynamic load rating: 4790 N
- Basic static load rating: 5810 N
- Mass: 46 g
Use the listed dimensions and ratings to verify compatibility with the mating installation.
